使用多層低溫共燒陶瓷於疊層波導微波被動組件之研製

Design of Laminated Waveguide Microwave Passive Components using Multilayer LTCC Technology

沈澤旻(Tze-Min Shen)

指導教授 ： 吳瑞北

國立臺灣大學/電機資訊學院/電信工程學研究所/博士(2012年)

https://doi.org/10.6342/NTU.2012.03328

摘要

無資料

關鍵字

陶瓷 ； 濾波器 ； 疊層波導 ； 魔術T ； 多層

並列摘要

This dissertation focuses on the development of laminated waveguide passive components including millimeter-wave filters and multi-function 180° hybrids in multilayer low-temperature co-fired ceramic technology. In the beginning, laminated waveguide bandpass filters with third-order Chebyshev and trisection responses are developed for V- and E-band applications. Cavity resonators are stacked in 3-D space to reduce circuit areas and increase vertical coupling mechanisms. The transmission zero of the trisection filter can be located at either side of the passband, depending on the resonant mode of the cavity on the main coupling path. Besides, a Ka-band waveguide diplexer is also presented with a fourth-order quasi-elliptic response at each band, resulting in good selectivity between the adjacent channels.
Next, a broadband planar laminated waveguide magic-T is proposed. Two orthogonal slots are used to excite even- and odd-symmetric field patterns in the main waveguide, respectively, resulting in a good isolation between each other. The equivalent circuit model is established and the input admittance is estimated to facilitate the structure design for wideband performance. The highly symmetric physical structure provides a broad bandwidth of low imbalance in phase and magnitude, with isolation between sum and difference ports greater than 40dB in the full operation band.
Finally, laminated waveguide magic-Ts with imbedded bandpass filter responses are developed for single and dual-band applications. In the single band design, the cavity with degenerate, but orthogonal resonant modes, i.e. TE102 and TE201 modes, is utilized to provide the in-phase and out-of-phase responses of the magic-T. On the other hand, the dual-band magic-T design exploits two kinds of overmoded cavities to achieve the sum and difference functions, respectively. The operated frequency bands are controlled by adequately choosing geometric shape of laminated waveguide cavity resonators. The filter responses are synthesized by cascading the cavities with proper coupling strengths according to the filter specification. Two design examples of the magic-Ts with a single-band third-order Chebyshev response and a dual-band second- order Chebyshev response are given to verify the proposed concepts.

並列關鍵字

Ceramics ； filter ； laminated waveguide ； magic-T ； multilayer

參考文獻

[2] Y.-S. Lin, C.-C. Liu, K.-M. Li, and C. H. Chen, “Design of an LTCC tri-band transceiver module for GPRS mobile applications,” IEEE Trans. Microw. Theory Tech., vol. 52, pp. 2718–2724, Dec. 2004.

[3] T. Baras and A. F. Jacob, “Manufacturing reliability of LTCC millimeter- wave passive components,” IEEE Trans. Microw. Theory Tech., vol. 56, no. 11, pp. 2574–2581, Nov. 2008.

[4] H. Uchimura, T. Takenoshita, and M. Fujii, “Development of a laminated waveguide,” IEEE Trans. Microw. Theory Tech., vol. 46, no. 12, pp. 2438–2443, Dec. 1998.

[5] K. Wu, “Integration and interconnect techniques of planar and nonplanar structures for microwave and millimetre-wave circuits—Current status and future trend,” in Asia–Pacific Microw. Conf., Taipei, Taiwan, Dec., 2001, pp. 411–416.

[6] D. Deslandes and K. Wu, “Integrated transition of coplanar to rectangular waveguides,” in IEEE MTT-S Int. Microwave Symp. Dig., Feb. 2001, pp. 619–622.