透過您的圖書館登入
IP:3.138.155.197
  • 學位論文

手擲無人飛行載具之研究、設計與實現

The Study, Design and Realization of the Portable Unmanned Aerial Vehicle

指導教授 : 馬德明

摘要


本論文之主要目的在於研究一可於無合適跑道條件下進行起降作業之固定翼飛行載具,提供第一線人員在裝備及起降場地缺乏之任務現場附近執行即時空中偵照任務。本文內容則依研究計劃之時程,分為任務定義、機體設計、飛行力學模型建立、控制器模擬、載具製造、航電系統開發整合與試飛報告等幾個階段。載具本身為使用電力推進,翼展2公尺、重量5公斤左右之小型UAV,以手擲起飛並飛行30分鐘任務時間及10公里任務半徑為設計目標。在航電整合部份,為了大幅簡化系統複雜度以及系統成本,因此使用PIC MCU做為系統的核心計算單元,搭配MEMS之Rate Gyro、電磁羅盤以及GPS模組做為狀態回授控制之感測器。而在控制概念上,橫向利用載具之先天安定特性,使用偏航角速率對副翼回授控制進行航向改變,縱向則以GPS高度對升降舵回授控制以維持飛行高度,用以達成基本的自律飛行與自動導航需求,並且在後期飛行實驗中驗證其可行性。

並列摘要


The goal of this paper is the study of a portable fixed wing unmanned aerial vehicle (UAV) for the field operators. The vehicle that can be launched by hand and landing without runway or well-paved landing field and has real-time reconnaissance capability. With the schedule of study project, this article will include mission requirement, vehicle design, analisys of vehicle’s flight dynamic model, simulation of controller, manufacture of aerial vehicle, integration of avionic system and the flight test report. This UAV has a 2m span wing and 5kg weight that can be launched by hand-throwing with a electric motor as its power plant. For the needs to simplify the avionics system, we using PIC MCU as the CPU of whole system and using MEMS rate-gyro, compass and GPS module as control system feedback sensors. We also using rate-gyro feedback to aileron for lateral turn-rate control and using GPS-altitude feedback to elevator for altitude hold control to reach the initial autonomous flight and navigation requirements. In the last part of real flight tests, it was proved that requirements of initial autonomous flight & navigation can be satified with this UAS.

並列關鍵字

Portable UAV UAS Automatic Control Aircraft Design

參考文獻


[13] “以微機電系統為基礎之飛行資訊量測組件設計與製作”, 吳宗興, 淡江大學航空太空工程學系碩士論文, 中華民國九十七年。
[14] “整合全球定位系統與慣性導航系統的初始校準設計與實現”,李正凱, 淡江大學航空太空工程學系碩士論文,中華民國九十五年。
[15] “無尾翼無人飛行載具之設計與實現”, 林源鍾, 淡江大學航空太空工程學系碩士論文, 中華民國九十六年。
[16] “無人飛行載具之航電系統整合”, 鄭玉祥, 淡江大學航空太空工程學系碩士論文, 中華民國九十八年。
[3] John D. Anderson, Jr, Aircraft performance and design, p.397, Mc Graw Hill,1999

被引用紀錄


司徒秉昇(2017)。鴻鵠太陽能飛機-飛控系統與地面站的設計〔碩士論文,淡江大學〕。華藝線上圖書館。https://doi.org/10.6846/TKU.2017.00556
洪為勝(2014)。分布式多微控器系統發展環境設計〔碩士論文,淡江大學〕。華藝線上圖書館。https://doi.org/10.6846/TKU.2014.00250
張正民(2012)。以動態模式為基礎之含時間延遲的飛行控制器之設計與分析〔碩士論文,淡江大學〕。華藝線上圖書館。https://doi.org/10.6846/TKU.2012.00354
張明宇(2010)。微機電慣性量測組件設計驗證及整合導航運算之研究〔碩士論文,淡江大學〕。華藝線上圖書館。https://doi.org/10.6846/TKU.2010.00809
廖淑華(2010)。無人飛行載具的多單晶片飛行電腦〔碩士論文,淡江大學〕。華藝線上圖書館。https://doi.org/10.6846/TKU.2010.00267

延伸閱讀