氫能程序與乙醛製程之熱能整合研究

Heat Integrations of Hydrogen Process and Acetaldehyde Process

楊上暉(Shang-Huei Yang)

指導教授 ： 陳錫仁

淡江大學/工學院/化學工程與材料工程學系碩士班/碩士(2006年)

https://doi.org/10.6846/TKU.2006.01095

摘要

本篇摘要未授權

關鍵字

氫氣能源 ； 蒸汽重組爐 ； 變壓吸附 ； 固態氧化物燃料電池 ； 乙醛 ； 換熱器網路

並列摘要

This abstract would not be displayed due to no authorization.

並列關鍵字

Hydrogen energy ； Natural gas reformer ； Pressure-swing adsorption ； Solid oxide fuel cell ； Acetaldehyde ； Heat exchanger network

參考文獻

1、Ahmad, S., B. Linnhoff and R. Smith, “Cost Optimum Heat Exchanger Networks: II. Targets and Design for Detailed Capital Cost Models,” Comp. and Chem. Engng., 14, 751 (1990).

3、Chou, C.T. and C.Y. Chen, “Carbon dioxide recovery by vacuum swing adsorption” Separation and Purification Technology 39, 51-65 (2004).

4、Chue, K.T., J.N. Kim, Y.J. Yoo, and S.H. Cho, “Comparison of Activated Carbon and Zeolite 13X for CO2 Recovery from Flue Gas by Pressure Swing Adsorption” Ind. Eng. Chem. Res. 34, 591-598 (1995).

5、Floudas, C.A., A.R. Ciric and I.E. Grossmann, “Automatic Synthesis of Optimum Heat Exchanger Network Configurations,” AIChE J. 32, 276 (1986).

6、Gundersen, T. and I.E. Grossmann, “Improved Optimization Strategies for Automated Heat Exchanger Network Synthesis Through Physical Insights,”Comp. and Chem. Engng., 14, 925 (1990).