透過您的圖書館登入
IP:52.15.63.145
  • 學位論文

有機/無機複合材料應用於金屬保護塗膜研究

Metal Surface Adhesion Promotion for Corrosion Control with Organic/Inorganic Composites

指導教授 : 陳幹男

摘要


本研究利用較具環保性且鐵片不需複雜的前處理過程的單寧酸(Tannic acid)能與鐵金屬形成穩定鐵之錯化合物的特性,將其應用在鐵金屬表面之防蝕塗佈上,底漆(Base coat)以自由基硬化型環氧樹脂(UV-Epoxy)添加鋅粉和三羥甲基丙烷三丙烯酸酯(Trimethylolpropane triacrylate, TMPTA) ,以不同比例混合後,使用旋轉塗佈(Spin-coating)塗佈在金屬表面上後,以照射紫外光來產生自由基使混摻的化合物產生交聯,其不僅是鋅金屬與單寧酸產生穩定錯化合物鍵結,且因加入的TMPTA和UV-Epoxy產生架橋,而在金屬表面上形成緻密穩定的表面塗層。接著再進一步塗佈具疏水性官能基的面漆(Top coat),行紫外光交聯後,讓金屬、底漆與面漆產生緊密的結合,使得塗佈的底漆與面漆緻密覆蓋於金屬上達到相當好的抗腐蝕效果。

並列摘要


An aqueous tannic acid solution is used as steel surface coating primer; This characteristic can form black stablely complex with steel metal. In this experiment, we modify different ratio of UV-Epoxy, TMPTA and Zinc powder as base coat, then we use spin-coating method to spread them on steel metals’ surface. After that we add appropriate amount of Photo-initiator(e.g. 1173) to UV-curing. Exposing in UV light produce free radicals which lead compositions to crosslinking. Then a top coat resins consists of hydrophobicity of UV-reactive UV-PU and a tri-acrylate UV-reactive diluent (TMPTA) as a reactive diluent are applied on metal surface as a top coat. A photo-initiator are added and cured respectively with UV-radiation. The treated steel metal surface coating properties has been evaluated by salt spray to exhibit its anti-corrosion. The best results in our experiments are that the top coat containing PDMS-function which could put in salt-spray test without corrosion more than 750 hours.

並列關鍵字

Tannic acid UV-curing Polyurethane Zinc

參考文獻


13. 郭勇, 鍍鋅鋼片之耐蝕性與上漆性評估介紹, 防蝕工程, 1995.
50. 程子豪, 長效型金屬表面保護塗膜研究, 淡江大學化學系碩士論文, 2012
4. 李攸軒, Ln2Zr2O7(Ln=Nd, Gd)相轉變與矽氧化物薄膜對鋼片防蝕之研究, 淡江大學化學系博士論文, 2011.
6. 陳玉娟, 以溶膠凝膠法製備有機無機複合皮膜對鐵片表面防蝕之研究, 淡江大學化學系碩士論文, 2006.
9. William D. Callister, JR., Materials Science and Engineering an Introduction, John Wiley&Sons, 2003.

延伸閱讀