BiCaSrCuO非晶相製程之研究

Fabrication of the amorphous BiCaSrCuO

陳明全(Ming-Chuan Chen)

指導教授 ： 錢凡之

淡江大學/理學院/物理學系碩士班/碩士(2006年)

https://doi.org/10.6846/TKU.2006.00948

摘要

本論文主要是設計新的製程方法，把原本平放的高溫爐直立，並加裝封頭，使焠冷的時間得以藉由人為控制而改變，並且可以在樣品燒結時通入不同的氣體，有助於對樣品的分析。
而研究系統是以Bi-Ca-Sr-Cu-O為主，用新的製程方法，改變焠冷的速率並通入不同含氧量的氣體，研究其焠冷的速率與含氧量對應Bi-Ca-Sr-Cu-O系統非晶態的生成與其超導電性之關係。

關鍵字

Bi-Ca-Sr-Cu-O ； 非晶態 ； 超導體

並列摘要

The thesis is mainly based on a newly designed process which helps us analyze the sample. We upright the high temperature furnace, and seal it with a copper cap. The quench rate is manipulated artificially. Also, we fill the furnace with different gases while the sample is sintered.
Bi-Ca-Sr-Cu-O system has the amorphous state and the superconducting phase. The research uses a new process based on Bi-Ca-Sr-Cu-O system to find out the relation between the amorphous state and superconducting phase by shortening the quench rate and filling the furnace with different Oxygen content gases.

並列關鍵字

Bi-Ca-Sr-Cu-O ； amorphous ； superconductive

參考文獻

TRANSACTIONS ON MEGNETICS,25,2(1980)

參考文獻

[1] W.Meiss,R.Ochsenfeld,Naturwiss,21,787(1933).

[2] Poole,Farach,Creswick,Superconductivity(1955)

[3] J,G.Bednorz,K.A.Muller,Z.phys.B,64,189(1986)