In this study, A different process is used to carry out electropolymerization of conjugated polymers. Micropatterns of conjugated polymers on solid substrates and manipulated to be applied in optoelectronics industries. This experiment develops a different strategy for the preparation of conductive polymers micropatterns on ITO substrates. The purpose is to produce low-cost organic microelectronic devices. Photolithography techniques are used to create a microchannel polymer plate. PDMS monomer is applied on the nickel template, and heated for 8 hours at 80 C . After The microchannels were constructed by firmly placing an appropriate PDMS mold with microtrenches onto an ITO surface. Preparation of large-area micropatterns is created by electropolymerization of conjugated polymers within microchannels. The final micropatterns of conductive polymers on ITO substrates are obtained.