表面處理對於提升全氧化鋯黏著式牙橋固定效果之研究

Influences of surface treatments on the adhesion of zirconia dental bridge

許珮琦(Pei-Chi Hsu)

指導教授 ： 楊永欽

國立臺北科技大學/工程學院/材料科學與工程研究所/碩士(2011年)

https://doi.org/10.6841/NTUT.2011.00292

摘要

因申請專利,暫不公開

關鍵字

氧化鋯陶瓷(3M LAVA) ； 表面處理 ； 表面粗糙度 ； 微拉伸鍵結強度

並列摘要

因申請專利,暫不公開

並列關鍵字

zirconia ceramic (3M LAVA) ； surface treatment ； surface roughness ； micro-tensile bonding strength

參考文獻

[3]　Andrea Fabianelli, Sarah Pollington, Federica Papacchini, Cecilia Goracci, Amerigo Cantoro, Marco Ferrari, Richard van Noort,“The effect of different surface treatments on bond strength between leucite reinforced feldspathic ceramic and composite resin”, Journal of dentistry, 2010, 38 39-43.

[4]　Esam Tashkandi,“Effect of surface treatment on the micro-shear bond strength to zicronia”, The Saudi Dental journal, 2009, 21, 113-116.

[6]　“EUROPEAN PATENT APPLICATION”, European Patent Application, EP 1 777 206 A1.

[7]　Teixeira Erica, Piascik Jeffrey, Stoner Brian, Thompson Jeffrey,“Dynamic fatigueand strength characterization of three ceramic materials”, J Mater Sci Mater Med, 2007, 18:1219-1224.

[8]　Burak Taskonak, Jiahau Yan, John Mecholsky, Atilla Sertgoz, Ayse Kocak,“Fractographic analyses of zirconia-based fixed partial dentures”, Dent Mater, 2008, 24:1077-1082.