以提昇能源效率及供電穩定性為目的之車用風力發電系統

Design of Wind Power System to Improve Energy Efficiency and Electric Power Stability of Vehicle

鄭文平(Wen-Ping Cheng)

指導教授 ： 黃崇能

國立臺北科技大學/機電學院/車輛工程系所/碩士(2005年)

摘要

車輛工業對所生產的產品都具有以最小的成本、最低的油耗、最佳的功能為目標，但彼此之間都有着相互牴觸的地方。因此若能有效的「化阻力為助力」回收加諸於車體迎風面之風阻損失，轉換成有效之能量，如此一來整車系統之能源效率便可獲得提升。故本論文提出以風力發電為基礎之輔助型車用發電系統，藉此提昇車輛能源使用效率及電力穩定。透過MATLAB/SIMULINK模擬的方式，論證其正確性與可行性，並說明本研究之模擬步驟與分析，且將結果與前述之邏輯論證做比對，以歸納出最佳化之系統。

關鍵字

車輛 ； 風力發電 ； 能源效率

並列摘要

The common goals for vehicle industry always focus on minimum cost, lowest fuel consumption, and optimal function, but many contradictions exist and conflict with each other. So if can effectively retrieve the wind loss against on car body and transfer to useful power as' turn obstruction into helping hand ', then the energy efficiency of vehicle system can be promoted. In this paper, the auxiliary generation system based on wind power is proposed to improve energy efficiency and stabilize electric power supply. The effectiveness of this proposal is confirmed through the MATLAB/SIMULINK simulation studies and the comparison of logical demonstration to induce the optimal system.

並列關鍵字

vehicle ； wind power generation ； energy efficiency

參考文獻

[3] Charles A. Amann, “The Stretch for Better Passenger-Car Fuel Economy,” SAE Paper, 972658, pp.87-91.

[6] Masayuki Soga, Michihito Shimada, Jyun-Ichi Sakamoto and Akihiro Otomo, “Development of vehicle dynamics management system for hybrid vehicles: ECB system for improved environmental and vehicle dynamic performance,” JSAE Paper, 20024667, pp.459-464.

[7] T.F. Chan, “Capacitance requirements of self-excited induction generators,” IEEE Transactions on Energy Conversion, vol. 8, no. 2, 1993, pp.304-311.

[8] B.S. Borowy and Z. M. Salameh, “Methodology for optimally sizing the combination of a battery bank and PV array in a Wind/PV hybrid system,” IEEE Transactions on Energy Conversion, vol. 11, no. 2, June 1996, pp.367-375.

[13] SOJA, H., WIEDEMANN, J., “The Interference Between Exterior and Interior Flow on Road Vehicles,” Ing`enieurs d’ Automobile, Sept. 1987, pp.101-125.