新式節能流程應用於工業部門

A novel energy-saving program for industrial sector

廖立騰(Li-Teng Liao)

指導教授 ： 李達生

國立臺北科技大學/機電學院/能源與冷凍空調工程系碩士班/碩士(2013年)

https://doi.org/10.6841/NTUT.2013.00708

摘要

本研究藉由相關的文獻收集與整理，找出工業部門能源效率改善的關鍵因素，並提出一套適用於各種類型工業部門的新式節能流程，以及進行實際的案場應用。根據文獻分析指出，工業部門節能改善最重要的兩大關鍵因素為節能策略與節能設備，依據此兩大因素本研究將工業部門區分為四大象限，並提出一節能象限區分點檢表，並用來進行相關的分析。此新式節能流程是先進行案場相關的資料收集與現場勘查，再根據案場的現場勘查與使用本研究提出的節能象限區分點檢表來進行相關的分析與定義出該案場的節能象限。並依此來決定是否進行初期的改善，如ECIT技術的導入、設備增設或更換等，還是進行進一步的節能改善規劃，並促使工業部門維持在高效的能源效率營運之下。
研究結果得知：工業部門進行節能改善時，需要一套適切的流程來幫助進行評估。本研究提出之新式節能流程可以有效的幫助工業部門進行節能策略與設備的導入，創造出最大化的節能成效。初期改善時進行EICT技術(節能策略)的導入可以達成10~20%的節能成效，而再進一步的進行節能設備的更換與投入可以再增加1%~10%的節能成效。由此可見節能策略與節能設備的投入，對於工業部門進行節能改善時，可說是缺一不可。

關鍵字

工業部門 ； 節能流程 ； 能源效率改善 ； 節能技術 ； 節能策略

並列摘要

In this study, a novel energy-saving program that can concord all types of industrial sectors has been proposed and gets verified with few case studies. The key factors in improving the energy efficiency in the industrial sectors have been defined based on the comprehensive literature surveys. The energy policy and energy saving technologies are the two most important key factors have been identified as the driving force in improving the energy efficiency in the industrial sectors. Based on these two key factors, the industrial sectors are divided into four major energy quadrants, and a distinction checklist has been made and used for related analysis. This novel program begins with the field-related data collections and on-site survey, followed by the analysis work using the distinction checklist, and then defines and categorizes the results from the analysis work into those four major quadrants accordingly. Decision on the initial energy efficiency improvement, such as the installation of EICT, the addition or replacement of energy-efficient equipment, etc., will be made based on the analysis outcomes. Subsequently, further improvement in energy-saving plan will be considered so that the industrial sector could maintain the operations under the condition of high energy efficiency.
The study results show that an appropriate program should be acquired to evaluate how well the energy efficiency improvements have been conducted in the industrial sectors. The proposed novel energy-saving program can effectively help the industrial sectors in introducing the energy policy and energy saving technologies and therefore generate the maximum energy conservation for industrial sectors. Implementing the EICT (energy policy) in the initial improvement assignments can help save the energy use in range of 10% to 20%, and the investment and replacement on energy-efficient equipment can further conserve 1% to 10% of energy use. Thus, implementations of energy policy and energy saving technologies are necessary in performing the conversation and improvement of energy use in the industrial secto

並列關鍵字

Industrial sectors ； Energy-saving program ； Improvement in energy efficiency ； Energy saving technologies ； Energy policy

參考文獻

[2] United Nations Industrial Development Organization (UNIDO). “Policies for promoting industrial energy efficiency in developing countries and transition economies;” 2008 https://www.unido.org/fileadmin/media/documents/pdf/Energy_Environment/ind_energy_efficiencyEbookv2.pdf

[3] Mahlia TMI. “Emissions from electricity generation in Malaysia.” Renewable Energy 2002;27:293–300.

[4] Mahmoud A, Shuhaimi M, Abdel Samed M. “A combined process integration and fuel switching strategy for emissions reduction in chemical process plants.” Energy 2009;34:190–5.

[5] Hepbasli A, Ozalp N. “Development of energy efficiency and management implementation in the Turkish industrial sector.” Energy Conversion and Management 2003;44:231–49.

[6] Petrecca G. “Industrial energy management: principles and applications.” USA: Kluwer Academic Publisher; 1992.