電化學表面改質對促進316L不?袗?生醫相容性之影響研究

Effect of Electrochemical Modification on Enhancing the Biocompatibility of 316L Stainless Steel

林奕孚(I-Fu Lin)

指導教授 ： 歐耿良

共同指導教授 ： 李勝揚

臺北醫學大學/口腔醫學院/口腔科學研究所/碩士(2007年)

摘要

諸多研究顯示，316L不鏽鋼於人體的生物相容(biocompatibility)有極高的評價，其非常適合做為人體的植入物，然而316L不鏽鋼之所以具極佳的生物相容性主要是與其金屬表面的氧化層有關，且於一些研究及文獻亦顯示植入生物體內材料表面的孔徑大小和細胞初始的攀附行為、增殖及分化有密切關係。若能有效控制氧化層為微奈米複合式多孔性將對骨整合會有所助益。
本研究以電化學的陽極處理方式使316L不鏽鋼表層形成一層微奈米複合式多孔性的三氧化二鉻(Cr2O3)結構，並以物理及化學性的分析儀器測試表面之成分、元素、膜厚、孔洞大小及結構是否符合要求，之後將對符合要求的試片於無塵室加以清洗、消毒後，即以這些試片進行細胞培養，經特定時間分別對細胞的攀附、增殖作不同的測試， 並加以比較不同條件下測試的結果。
本研究主要是在探討316L不鏽鋼植體表面經由電化學方式製作出不同的氧化層厚度及孔徑大小，並以細胞實驗在不同條件下的生長情形，此外更進一步探討微奈米複合式孔洞的表面與骨整合的癒合機制並進行比較，此結果可對縮短植入於骨內的植體，如牙科植體的骨整合癒合時間有所助益。

關鍵字

316L不鏽鋼 ； 骨整合 ； 三氧化二鉻 ； 陽極處理 ； 奈微米孔洞

並列摘要

316L stainless steel with excellent biocompatibility has been investigated by many researches. It is due to its passive oxide film. The surface characteristics of 316L stainless steel implant, such as pore sizes/roughness, are related to initial cell behaviors and osseo/osetointegration. However, the surface design of dental implant for enhancing the rate and result of osseo/osetointegration remains unknown. The purpose of this study is to investigate the effects of the various 316L stainless steel oxide thicknesses and pore sizes/roughness on the initial attachment and proliferation of the osteoblast-like cell (MG-63) based on the above investigation, it is believed that optimal pore sizes/roughness will be promoted the osseo/osetointegration.
In the present study, electrochemistry process was performed as surface treatment of 316L stainless steel implant. Dichromium trioxide (Cr2O3) was formed on 316L stainless steel implant surface after anode treatment. Due micro-nano porous oxide structure was formed by anodization treatment.
As mentioned above, physical properties, chemical properties as well as biocompatibility of 316L stainless steel implant with and without electrochemical surface treatments were analyzed clearly. In addition, biocompatibility of 316L stainless steel implant with and without surface treatments was performed by cell cultures. MTT test and cell counting is used to investigate the cell attachment and proliferation. Furthermore, mechanism of bone healing on micro-nanoporous implant surface and interaction were also discussed clearly. It is believed that it is helpful to realize the osseointegraion mechanism.

並列關鍵字

316L stainless steel ； osseo/osetointegration ； dichromium trioxide ； anodization treatment ； micro-nanoporous

參考文獻

1. Disegil J. A. & Eschbachz L. Stainless steel in bone surgery. J. Care Injured 31, S-D2-6 (2000).

2. Seligson, D. et al. In vivo study of stainless steel and Ti-13Nb-13Zr bone plates in a sheep model. Clin Orthop Relat Res, 213-23 (1997).

3. Tonino, A. J., Davidson, C. L., Klopper, P. J. & Linclau, L. A. Protection from stress in bone and its effects experiments with stainless steel and plastic plates in dogs. The Journal of Bone and Joint Surgery 58-B, 107-113 (1976).

4. Lina, F. H., Hsub, Y. S., Linb, S. H. & Sun, J. S. The effect of Ca/P concentration and temperature of simulated bodyfluid on the growth of hydroxyapatite coating on alkali-treated 316L stainless steel. Biomaterials 23, 4029-4038 (2002).

5. Harnroongroj, T. & Vanadurongwan, V. Biomechanical aspects of plating osteosynthesis of transverse clavicular fracture with and witho ut inferior cortical defect. Clinical Biomechanics 11, 290-294 (1996).