半濕式積層晶片電感印刷--探討影響印刷厚度的因素

Study of Factors Controlling the Thickness of Half-Wetting Printing Mulitilayer Inductor Chip

陳立(Li Chen)

指導教授 ： 余子隆

元智大學/工程學院/化學工程與材料科學學系/碩士(2004年)

摘要

電子產品在小型化、可攜式、元件高度裝配及降低生產成本之發展趨勢下，表面粘著技術及表面粘著元件已快速發展，並且在電磁相容的考量下，電子產品的電磁干擾消除已成為電子系統設計之基本要求，因此積層電感與陶鐵磁珠應運而生。
此次的研究題目主要是藉著實際的印刷實驗，對於較不為人所注意的網目、乳膠厚度及印刷漿料的種類做探討，針對網目、乳膠厚度及印刷漿料對網版印刷的印刷厚度的影響做研究。

關鍵字

電感 ； 印刷

並列摘要

Owing to their thin-thickness and light-weight, chip type electronic products are developed and replace the traditional components.
In this thesis, process of preparing multi-layer ceramic inductor from single-layer inductor, i.e. silver-palladium electrodes, ceramic pastes, etc., was inevestigated. Effect of mesh screen, emulsion paste, and other various kind of pastes on the printing thickness wereobserved and discussed.

並列關鍵字

Inductor ； Printi

參考文獻

17.Sano Yasushi, "Progress and Application Methods of Advance Screen Printing Technologies in Electronics Fields", Micro-tec 2000 Training Course﹒

20.J.S. Ward, F.D. Martin, "Prediction of Viscosity of Partially Hydrolyzed Polyacrylamide Solution in the Presence of Calcium and Magnesium Ions", Soc Pet Eng J, 21, pp.623-631, 1981﹒

21.K.A. Ait, P.J. Carreau, G. Chauveteau, "Rheological Properties of Partially Hydrolyzed Polyacrylamide Solution", J. Rheology, 33, pp.537-561, 1981﹒

22.S. Blackburn, H. Bohm, "Silicon Carbide Fiber-Reinforced Alumina Extrusion",J. Materials Research, 10, pp.2481-2487, 1995﹒

23.P.Coussot, S. Proust, C. Ansey,"Rheological Interpretation of Yield Stress Fluids", J. Non-Newtonian Fluid Mechanics, 66, pp.55, 1996﹒