LabVIEW之Fuzzy控制應用於溫度控制系統之研究

The Temperature Control System Using Fuzzy Algorithm of LabVIEW

吳政賢(Cheng-Shien Wu)

指導教授 ： 謝建興

元智大學/工程學院/機械工程學系/碩士(2006年)

https://doi.org/10.6838/YZU.2006.00045

摘要

本研究的目的是利用LabVIEW( Laboratory Virtual Instrument Engineering Workbench )軟體進行Fuzzy控制，並應用於溫度控制系統上，本系統所使用的資料擷取卡是研華科技的ADDA卡。首先必須利用LabVIEW來建立一組AD資料擷取的程式，然後再進行兩組DA控制的程式撰寫。待完成AD及DA的圖控程式後，再進行模糊邏輯控制程式的撰寫。
在完成整體的控制程式後，我們分別設定不同的狀況，進行各種狀況的試驗，並比較各種設定狀況下，系統穩定平衡的優劣。

關鍵字

溫度控制系統 ； 模糊邏輯控制

並列摘要

The goal of this thesis is to use fuzzy logic control algorithm with LabVIEW software and applies them on the temperature control system. The hardware interface is using ADDA card to receive data. At first, we must set up the AD channel program that can receive the data and then set up the two DA channels’ program that can control the outputs. After completing the programs of AD and DA, we start to implement the fuzzy logic control program into temperature control system. Moreover, we set some different situations to test the system and compare the results with different situations.

並列關鍵字

Temperature control system ； LabVIEW( Laboratory Virtual Instrument Engineering Workbench ) ； Fuzzy logic control

參考文獻

[1] Zadeh, L.A.,“Fuzzy sets.”,Inf. Control 8, 338-353,1965.

[4]Mamdani,E.H.,and Assilians,S.”An Experiment om:omgiostoc synthesis with a Fuzzy logic controller”,Int.J.Man-Machine study,vol.7, pp1-13

[13] Madan MG, Jerzy BK, Trojan M, “Multivariable structure of fuzzy control systems”, IEEE Transactions on Systems, Man and Cybernetics, vol.16 no.5, pp.638-655, 1986.

pharmacokinetic-pharmacodynamic model ”,Internal Report,

Automatic Control and Systems Engineering, Sheffield