具平行流道之新型平板熱管之效能測試

Performance Test of a Novel Flat Heat Pipe with Parallel Channels

吳嘉達(Jia-Da Wu)

指導教授 ： 王訓忠

國立清華大學/工學院/動力機械工程學系/碩士(2007年)

摘要

無資料

關鍵字

平板熱管 ； 平行流道

並列摘要

無資料

並列關鍵字

flat heat pipe ； parallel channels

參考文獻

[9] 江沅晉, “微結構蒸氣腔體之研究與電子散熱應用,” 國立台灣大學機械工程學研究所博士論文, 2005.

[1] Garner, S.D., “Heat sink capabilities and limitations: a hierarchical evaluations of leading thermal technologies,” HT2005-72088, Proceeding of HT2005, 2005 ASME Summer Heat Transfer Conference, San Francisco, California, USA, July 17-22, 2005.

[4] Boukhanouf, R., Haddad, A., North, M.T., and Buffone, C., “Experimental investigation of a flat plate heat pipe performance using IR thermal imaging,” Applied Thermal Engineering, 26 (2006) 2148–2156

[5] Chang, J-Y., Unnikrishnan, V., Ravi, P., and Suzana, P., “Thermal performance of vapor chambers under hot spot heating conditions,” Proceedings of IPACK2005 ASME InterPACK’, San Francisco, California, USA, July 17-22, 2005.

[7] Kurihari, H.M. and Myers, J.E., “Effects of superheat and roughness on the boiling coefficients,” AICHE J., 6 (1960) 83-91.