透過您的圖書館登入
IP:18.219.236.62
  • 學位論文

光電元件與構裝模組之界面穩定性與材料特性

Interfacial Stabilities and Materials Characterizaztions in Optoelectronic Devices and Packaging Modules

指導教授 : 陳信文

摘要


Optoelectronic (OE) systems play important roles in advanced applications of various fields, such as energy-saving light source, solar cell, flat-panel display technology, wireless communication technology, etc. These OE systems are composed of OE devices and packaging modules which contain a large number of thin-film or bulk heterogeneous materials joints. The interfacial stabilities of the interfaces are crucial for the functionalities and reliabilities of the OE products. Metallurgical reactions in the thin-film and bulk joints are of essential importance in materials design and manufacture conditioning. The aim of the study is at the important materials systems in OE applications and to make efforts on evaluation of the interfacial stabilities. The materials systems investigated in the thesis are the interfacial reactions between thin Ni film and InxGa1-xN, V/Al/Ag Ohmic contacts to n-GaN, interfacial reactions in the Sn-In/Cu and Sn-In/Ni couples, electromigration effect upon the Sn-In/Cu interfacial reaction, and the Sn whisker formation on the thick pure Sn film. These interfacial problems are analyzed by using various materials characterization techniques and evaluated based on the knowledge of materials phase equilibria and transport. The mechanisms of phase transformations and morphological developments are proposed. In addition, the 250 oC isothermal section and liquidus projection of the Sn-In-Cu ternary system are experimentally determined in order to fulfill the lack of data in the literatures.

並列摘要


光電系統(optoelectronic system)已被廣泛地應用於各式前瞻技術當中 ,包括目前倍受重視的低耗能照明設備與發電裝置,如白光發光二極體(light emitting diode, LED)及太陽能電池(solar cell),以及平面顯示器與無線通訊技術等。這些光電系統中包含了大量的異質材料相接界面,包括各式功能性元件中的薄膜異質界面,以及構裝模組中的塊材接點。這些異質界面的穩定性直接決定了光電產品的功能性以及可靠度。適度的界面反應(interfacial reaction)可產生良好的歐姆接觸(Ohmic contact)於元件,以及可靠的電子接點於構裝模組中;而過度的反應則會造成元件失效以及接點破壞。因此,開發新穎光電材料與製程時,必須對系統中的薄膜與塊材界面反應有所了解。本研究探討的範圍涵蓋光電產品中重要的材料系統與其界面行為,包括光電元件中的薄膜界面:氮化銦鎵(InxGa1-xN)對鎳薄膜之反應、與釩/鋁/銀(V/Al/Ag)薄膜對負型氮化鎵(n-GaN)之歐姆接觸,以及光電構裝中之塊材界面:錫銦無鉛銲料(Pb-free solder)與銅、鎳界面之反應與電遷移效應(electromigration effect)、以及純錫厚膜之錫鬚(Sn whisker)生長。運用各式形態(morphology)、組成與結構之材料分析技術,配合材料相平衡與輸送的知識,對這些異質界面的相變化與形態發展進行討論,並提出反應的機制。此外,本研究同時以實驗方法測定錫-銦-銅三元系統之液相線投影圖(liquidus projection),與250度等溫橫截面圖(isothermal section),以補充文獻上之不足。

參考文獻


7. P. Mueller and B. Valk, IEEE Electronic Components and Technology Conference, Vol. 18, pp. 5-9, (2000).
15. C.-M. Chen and S.-W. Chen, Journal of Applied Physics, Vol. 90(3), pp. 1208-1214, (2001).
17. S.-W. Chen and C.-M. Chen, Journal of Materials, Vol. 55(2), pp.62-67, (2003).
19. Official Journal of the European Union, 13.2.2003 (2003) L 37/19.
26. T. H. Chuang, C. L. Yu, S. Y. Chang, and S. S. Wang, Journal of Electronic Materials, Vol. 31(6), pp. 640-645, (2002).

延伸閱讀