自動化浸塗系統開發及玻璃表面親疏水性改質研究

本論文使用自製的浸塗機(Dip coating machine)進行其應用研究，以遠端行動裝置結合WiFi，設定浸塗機的參數條件，省去因多種參數設定，而需要大顯示幕的空間。並且任何行動裝置皆可連線，增加其便利性。利用浸塗機將親水性或疏水性溶劑，塗佈於玻璃基板上，設定不同的製程條件(如:塗佈機上拉速度、烘烤時間、烘烤溫度)，然後量測不同製程條件得到的樣品表面，與水滴間的接觸角大小，分析塗佈與烘烤後的玻璃基板，是否因製程條件的不同，影響玻璃表面薄膜，親水性和疏水性的效果，及親疏水性的耐久度，進而找出合適的製程條件。

關鍵字

疏水性；親水性

並列摘要

This research studies the application of home-made “ Dip coating machine ” and uses remote mobile device with WiFi to set parameter conditions of “ Dip coating machine ”, so as to omit the space of large-screen display for many various parameters setting. And “ Dip coating machine ” can be connected with any mobile device to increase its convenience. We use “ Dip coating machine ” to coat the hydrophilic or hydrophobic solvent on the glass substrate, and set the different parameters in each process (such as: up-speed of “ Dip coating machine ” , baking time, baking temperature), then measure the contact angle of each process sample with the water drop. To analyze the influence of different process parameters for the hydrophilic and hydrophobic characterization and its durability on the glass surface. Finally, we get the suitable process conditions for the future different application.