利用人機介面做即時設備維修通報與維修管理系統之建置

因近年機械的高度自動化，使生產效率與技術提高進步飛速，但在傳統及大部分的中小企業中，雖擁有大量的自動化生產機台，但在整合部分上仍然依循落後的處理方式，在工作中發現時常發現因口頭傳遞造成的錯誤訊息與事後的責任推卸問題，大量紙本造成整理與後續調閱的不便。而機台本身的各種介面已有足夠的傳輸能力可以進行電子化作業，將所需的資訊數位化，以方便留存紀錄，確保維修的資訊，方便日後的追查。本論文中設備端以ProFace的人機介面為主，利用GP-Pro EX軟體來製作維修頁面，方便生產者可以在機台上直接發出維修需求單，並透過人機介面的線上監控軟體ProServer的設定下，將特定位址的數據發出至維修系統，以顯示在網頁上。網頁部分以Visual Basic為基礎的ASP.Net所編譯的網頁建立一套線上的網頁維修系統，另外對應於設備端的部分，編譯一組程式用以監控設備端所發出的維修需求。利用該系統可以在生產機台上面直接輸入維修需求，並在網頁上顯示。維修人員只要在網頁上進行登錄維修動作並進行維修，更能在維修後註記維修的細項和維修時間，以方便日後的維修歷程查詢。在未來的期許更希望能透過歷程的記錄上統計出各式零件的更換週期，而從這些統計數據中來事先預期零件的備貨量，減少多餘庫存的浪費。

關鍵字

維修系統；人機介面； PerServer ； ASP.Net

並列摘要

In recent years, progress in increasing the mechanical automation, which makes the production efficiency. However, most of the factories have a lot of automated machines, but there is no good repair system, repair manuals too single machine, making the finishing inconvenient. When a fault, it will always be arguing, if the operator didn’t say cleary, or too many paper records, making the finishing inconvenient. In this paper, System design of machine maintenance notification in human-computer interface with ProFace and GP-Pro EX software, which allows the operator to issue a repair notice in the machine, and ProServer software can collect information to repair the system database, and the data show on the web. Repair systems’s web page using ASP.Net with VB language and build program RepairNPX monitoring software to communicate with ProServer software. When the Repair information is recorded in the database that the message will appear on the page, engineers can log in to the registration and Repair the system for maintenance, after the end, engineers can record in maintenance mode and annotation data bank. In the future, it can count the Repair records to design CBR, and calculate the damage cycle parts to design and calculate maintenance cycle of parts inventory.

並列關鍵字

RepairSystem ； HMI ； PerServer ； ASP.Net

參考文獻

[2] Schank, R.C.Abelson, R.P., Scripts, Plans, Goalsand Understanding, Erlbaum, Hillsdate, NJ, 1977.

[4] Paek, Y.K., Seo, J. and Kim, G.C., “An expert system with case-based reasoning for database schema design,” Decision Support Systems, Vol. 18,pp.83-95, 1996.

[5] Mukhopadhyay T., Vicinanza S.S. and Prietula M.J.,“Examining the Feasibility of a Case-Based Reasoning Model for Software Effort Estimation,” MIS Quarterly,Vol.12, Iss.2, pp.155-171, 1992.

[6] Koiranen, T., Virkki-Hatakka, T., Kraslawski, A. and Nystrom, L.,“Hybrid, fuzzy and neural adaptation in case-based reasoning system for process equipment selection,” Computer and Chemical. Engineering, Vol.22, pp.S977-S1000, 1998.

[7] Yang, J.B. and Yau, N.J., “Integrating Case-Based Reasoning and Expert System Techniques for Solving Experience-Oriented Problems,” Journal of the Chinese Institute of Engineers, Vol. 23, No. 1, pp.83-95, 2000.

國際替代計量

利用人機介面做即時設備維修通報與維修管理系統之建置

未授權

主題瀏覽