- 學位論文
電阻式荷重元材料研究與分析
Material research and analysis of strain resistance load cells
若您是本文的作者，可授權文章由華藝線上圖書館中協助推廣。
並列摘要
In this thesiss , F.E.M.(Finite Element Method) was used to study the modal design of strain resistance load cell. Due to testing different loading ,it will make different tensions with the load cell. Therefore, the resistance is a function of the loading. The analysis is to explore the deformation conditions and the stress states .The different materials of strain resistance load cell is also compared．
參考文獻
1.「傳感器」哈爾濱工業大學 張鍚富主編 機械工業出版社
2.「傳感器應用及其電路精選(上冊)」張鍚富主編 電子工業出版社
3.「傳感器敏感元器件實用指南：名詞術語、原理特性、中外產品、實用電路、企業名錄」張福學 等編著 電子工業出版社
4.「傳感器敏感元器件大全」張福學 等編著
5. 「工程最佳化設計」徐業良 國立編輯館
延伸閱讀
- 蘇龍賢（2005）。負微分電阻元件的應用〔碩士論文，崑山科技大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0025-0306200810411836
- Huang, P. C. (2008). 被動元件高分子承載帶之製備與研究 [master's thesis, Tatung University]. Airiti Library. https://www.airitilibrary.com/Article/Detail?DocID=U0081-0607200917244722
- 劉亞樵（2021）。電阻式氣體感測器控制電路開發之研究〔碩士論文，國立臺灣師範大學〕。華藝線上圖書館。https://doi.org/10.6345/NTNU202100418
- 張耀文 (2010). 免於電荷注入誤差之電荷式電容量測方法研究與應用 [doctoral dissertation, National Tsing Hua University]. Airiti Library. https://doi.org/10.6843/NTHU.2010.00625
- Khatiwada, M. (2019). Investigation of Thermal Interface Materials to reduce contact resistance [master's thesis, National Chiao Tung University]. Airiti Library. https://www.airitilibrary.com/Article/Detail?DocID=U0030-0306202016334299