- 學位論文
圖形化藍寶石基板缺陷檢測之研究
Inspection of Patterned Sapphire Substrate Defects
並列摘要
An optical inspection system for PSS is designed in this thesis. Before this inspection system, some basic image processing functions shall be implemented first , like thresholding , histogram , morphology , and edge detection. Boland C++ 5.0 is the programming tool used for image processing. By taking the real PSS image for inspection, we can optimize the parameter. Also, we can transfer this research to factory automation to reduce the cost and mass production.
參考文獻
Yu, “Improvement of InGaN–GaN light-emitting diode performance
2525, 2005.
[10] J. Shakya, J.Y. Lin, and H.X. Jiang, “Time-resolved electroluminescence
studies of III-nitride ultraviolet photonic-crystal lightemitting
enhancement in a nitride-based light-emitting diode with 22 degree
延伸閱讀
- 張峻銘（2014）。次微米微影於藍寶石基板圖案化之研究〔博士論文，國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU.2014.11105
- Chen, Y. J. (2011). 無光罩藍寶石基材蝕刻及其在發光二極體之運用研究 [doctoral dissertation, National Central University]. Airiti Library. https://www.airitilibrary.com/Article/Detail?DocID=U0031-1903201314410433
- 蔡孟緯（2014）。工廠排班最佳化模式之研究-以一LED藍寶石基板廠為例〔碩士論文，國立中央大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0031-0605201417534094
- Niu, Y., Xu, F., Hu, X., Zhao, J., Miao, H., Wu, X., & Zhang, Z. (2011). In Situ Investigation of the Silicon Carbide Particles Sintering. Journal of Nanomaterials, 2011(), 658-663-176. https://doi.org/10.1155/2011/728617
- 黃家揚（2011）。Study of Wet Etching at a Patterned Sapphire Substrate by Using a SiNx Barrier Layer〔碩士論文，元智大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0009-2801201415000854