透過您的圖書館登入
IP:18.191.223.123
  • 學位論文

新型三頻雙工電路與多頻匹配設計

Novel Triplex Bi-directional Circuit and Multi-band Matching Network Design

指導教授 : 陳富強

摘要


本論文前半部份,提出新式雙頻蕈狀結構,利用在蕈狀結構金屬片上附加L型裂口,使蕈狀結構之高階模頻率得以被降低以及控制,進而達到雙頻濾波之效果。該結構被應用於改良三頻雙工環路器之設計,不但降低電路製造之成本,亦使電路性能有效提升。本論文更進一步分析其電路運作機制,藉由化簡電路架構,開發出具備相同電路功能的新型微波電路,三頻雙工T型電路。經比較可發現,該電路擁有較大的頻寬以及較低的介入損耗。 本論文後半部份,則是提出全新的多頻匹配方法,將蕈狀結構結合懸置微帶線的理論延伸至串聯LC共振腔的概念,設計出易於製作的共振腔結構,並利用該結構與多級串接的單殘段匹配網路相結合,達成任意多頻匹配之效果。為驗證匹配之理論,本論文分別以雙頻與三頻平板式單極天線作為負載電路,依照匹配流程進行設計,成功將天線匹配於其共振頻率。

關鍵字

雙頻 三頻 多頻 匹配網路 單殘段

並列摘要


In the first part of this thesis, a novel dual-band mushroom-like structure is presented. By making L-shaped notches on the patch of mushroom-like structure, the high order mode frequency can be significantly reduced and controlled. A modified triplex bi-directional ring-hybrid is realized with dual-band mushroom-like structures. The proposed circuit yields better performance, and the cost of fabrication has been greatly reduced. Furthermore, by simplifying the topology of triplex bi-directional ring-hybrid, a novel microwave circuit called triplex bi-directional T-type circuit is developed, which has the same mechanism with the original circuit. The result shows that the proposed circuit can provide larger bandwidth and lower insertion loss. A multi-band matching network is proposed in the second part of this thesis. We extend the concept of the mushroom-like structure with suspending microstrip line to the series LC resonator, and realize multi-band matching by a combination of the resonator and multi-stage single stub matching networks. To test the presented approach, a dual-band and a tri-band planar monopole are designed to be the load circuits. Following the proposed matching scheme, the load antennas achieve good return loss at their resonant frequencies.

並列關鍵字

dual-band tri-band multi-band matching network single stub

參考文獻


[1] H. Hashemi and A. Hajimiri, "Concurrent multiband low-noise amplifiers-theory, design, and applications," IEEE Transactions on Microwave Theory and Techniques, vol. 50, pp. 288-301, Jan 2002.
[2] Y. Takayama, et al., "Microwave dual-band power amplifiers using two-frequency matching," Electronics and Communications in Japan (Part II: Electronics), vol. 89, pp. 17-24, 2006.
[3] A. Dutta, et al., "Parasitic-aware robust concurrent dual-band matching network for a packaged LNA," IET Microwaves Antennas & Propagation, vol. 3, pp. 1094-1101, Oct 2009.
[4] G. Castaldi, et al., "A dual-band Chebyshev impedance transformer," Microwave and Optical Technology Letters, vol. 39, pp. 141-145, Oct 2003.
[5] G. Castaldi, et al., "AN EXACT SYNTHESIS METHOD FOR DUAL-BAND CHEBYSHEV IMPEDANCE TRANSFORMERS," Progress in Electromagnetics Research-Pier, vol. 86, pp. 305-319, 2008.

被引用紀錄


胡登凱(2013)。應用互補螺旋矩形共振腔實現微小化帶通濾波器與分工器設計〔碩士論文,國立交通大學〕。華藝線上圖書館。https://doi.org/10.6842/NCTU.2013.00576
陳鼎元(2013)。基於類蕈狀結構之小型三頻雙模態微帶天線〔碩士論文,國立交通大學〕。華藝線上圖書館。https://doi.org/10.6842/NCTU.2013.00572

延伸閱讀