透過您的圖書館登入
IP:3.137.174.216
  • 學位論文

DLP微型投影系統之光路設計

Optical design of the DLP Pico projector

指導教授 : 孫文信
若您是本文的作者,可授權文章由華藝線上圖書館中協助推廣。

摘要


隨著科技日新月異,近年來手持式行動產品如手機、數位相機及數位攝影機等消費產品搭配投影能的應用增加,使的投影機的應用愈來愈多元化,讓微投影產品成為近年來的新興科技產品之一。 本論文主要是以設計一DLP微投影光學系統,設計內容包含照明系統的均勻化設計及成像系統的優化設計等,並研究評價投影系統微小化設計的品質與光學效率。 在光源模組上本論文採用高功率的LED燈源並搭配準直透鏡 (Collimator lens)與濾光鏡 (Dichroic Filter) 做為RGB三色光源的合光元件。而在光學引擎的架構設計上以Mirror Type架構取代傳統的TIR架構以降低成本並提高效率,並且利用透鏡陣列 (Lens Array)與4片式投影鏡頭模組的設計以縮小光學體積至6.8 c.c.。設計結果可達到10 lm/W與JBMA均勻度大於90%的設計目標。

並列摘要


Along with the development of technology, the application of the pico projector becomes diversified in recent years. It''s widely used in the portable devices like Mobilphone, Digital Camera and Digital Vedio and has become the one of thenew technical products. This thesis is focused on the optical design of DLP pico-projector system. Thecontent of this design includes the Illumination System and Image OpticalSystem. Then evaluating the optical performance and efficiency of this pico-projector. In light source module, we choose the high power LED lamp and use collimator lens and dichroic filter for RGB light combiner. In regard to the light engine design, we use a Mirror type structure to replace the traditional TIR structure for a higher efficiency and a lower cost. Besides, we use a lens array and design the Projection Lens with 4pcs lenses to reduce the optical volume to 6.8 c.c.. The simulation result can reach the target that the brightness is higher than 10 lm/W and JBMA uniformity is better than 90%.

並列關鍵字

illumination system etendue DLP Pico Projector

參考文獻


[1] 王亮舒、李政育,微型投影的技術剖析,台灣區電機電子工業同業公會電子報,2009/09/09 第 87 期,取自http://www.teema.org.tw/epaper/20090909/industrial013.html
[4] H.Moench, G.Derra, E.Fischer and X.Riederer, “Arc Stabilisation for Short Arc Projection Lamps”, SID 00 DIGEST, pp84-87, 2000
[7] M. R. Douglass, “Lifetime Estimates and Unique Failure Mechanisms of the Digital Micromirror Device (DMD)”, Texas Instruments Inc., Dallas,Texas, 1998
[8] L. J. Hornbeck, “Digital Light Process for High Brightness, High Resolution Applications”, Proc. Of SPIE, 3013, P27-40, 1997.
[11] 許修真,「以LED 為光源的反射式液晶投影照明系統之設計與分析」,元智大學電機工程研究所,碩士論文,民國93 年7 月。

延伸閱讀