不銹鋼與碳鋼活性氬弧銲接研究

Study on Activated Tungsten Inert Gas Welding of Stainless Steel and Carbon Steel

連中鶴(Lien Chung-ho)

指導教授 ： 曾光宏

國立屏東科技大學/工學院/材料工程研究所/碩士(2020年)

https://doi.org/10.6346/NPUST202000489

摘要

無資料

關鍵字

不銹鋼 ； 碳鋼 ； 異種鋼材 ； 活性劑 ； 氬弧銲接

並列摘要

無資料

並列關鍵字

Stainless steel ； Carbon steel ； Dissimilar steels ； Activated flux ； Tungsten inert gas welding

參考文獻

[1] K. H. Tseng, K. J. Chuang, “Application of iron-based powders in tungsten inert gas welding for 17Cr-10Ni-2Mo alloys,” Powder Technology, Vol. 228, pp. 36-46, 2012.

[2] N. S. Patel, R. B. Patel, “A review on parametric optimization of TIG welding,”International Journal of Computional Engineering Reserach, Vol. 4, No. 1, pp. 27-31,2014.

[3] K. H. Tseng, K. L. Chen, “Comparison between TiO2 and Sio2-flux assisted TIG welding processes,” Journal of Nanoscience and Nanotechnology, Vol. 12, pp. 6359-6367, 2011.

[4] W. Lucas, “Activating flux- improving the performance of the TIG process,”Welding and Metal Fabrication, Vol. 68, No. 2, pp. 7-10, 2000.

[5] D. S. Howse, W. Lucas, “An investigation into arc constriction by active fluxes for TIG (A-TIG) welding,”Science and Technology of Welding and Joining, Vol. 5, pp. 189-193, 2000.