析出硬化不銹鋼板活性氬弧銲接研究

Study on Activated Tungsten Inert Gas Welding of Precipitation Hardening Stainless Steel Plate

溫修逸(Wen Xiu-Yi)

指導教授 ： 曾光宏

國立屏東科技大學/工學院/材料工程研究所/碩士(2021年)

https://doi.org/10.6346/NPUST202100459

摘要

無資料

關鍵字

Corrax ； 活性劑 ； 氬弧銲接 ； 析出硬化不銹鋼

並列摘要

無資料

並列關鍵字

Corrax ； Activated flux ； Tungsten inert gas welding ； Precipitation hardening stainless steel

參考文獻

1.D. C. William, “Material Science and Engineering,”:An Introduction 5th Edition, John Wiley and sons, New York, 1999.

2.J. C. Lippold and D. J. Kotecki, “Welding Metallurgy and Weldability of Stainless Steels, ” John Wiley & Sons Inc, Hoboken, 2008.

3.V. Villaret, F. Deschaux-Beaume, C. Bordreuil, G. Fras, C. Chovet, B. Petit, and L. Faivre, “Characterization of gas metal arc welding welds obtained with new high Cr-Mo ferritic stainless steel filler wires,” Materials and Design, Vol. 51, pp. 474-483, 2013.

4.D. Kianersi, A. Mostafaei, and A. A. Amadeh, “Resistance spot welding joints of AISI 316L austenitic stainless steel sheets: Phase transformations, mechanical properties and microstructure characterizations,” Materials and Design, Vol. 61, pp. 251-263, 2014.

5.曾光宏、吳俊廷，「雙相不銹鋼之銲接特性與應用介紹(1)」，銲接與切割，第9卷，第3期，第32-33頁，2009。