Determining the Effect of Electrodeposition on the Longevity of Industrial Productions

Ghodrat Kohi

指導教授 ： Ali Rafinia

University of Applied Science and Technology/Engineering/Department of Manufacturing/碩士(2016年)

摘要

Wear is one of the main problems in various industrial productions. Electrodeposition is a common coating process which is used for different materials such as cast or 3D printed parts, and this method is using for ornaments and corrosion protection. In this research, we analysed design of workpiece for deposition to have a better coating process. Then different sublayers and sample preparation with polishing have been used to determine the quality of deposition. The results showed that electrodeposition increase tool wear about 11% in harder working situation and increased the longevity of produced parts.

關鍵字

Electrodeposition ； Titanium ； Surface treatment ； Sub layers

參考文獻

1. Khorasani, A.M., et al., A survey on mechanisms and critical parameters on solidification of selective laser melting during fabrication of Ti-6Al-4V prosthetic acetabular cup. Materials & Design, 2016. 103: p. 348-355.

2. Kitagawa, T., A. Kubo, and K. Maekawa, Temperature and wear of cutting tools in high-speed machining of Inconel 718 and Ti 6Al 6V 2Sn. Wear, 1997. 202(2): p. 142-148.

3. Murarka, S. and D. Fraser, Thin film interaction between titanium and polycrystalline silicon. Journal of Applied Physics, 1980. 51(1): p. 342-349.

4. Pang, M. and D.F. Bahr, Thin-film fracture during nanoindentation of a titanium oxide film–titanium system. Journal of Materials Research, 2001. 16(09): p. 2634-2643.

5. Benard, W.L., et al., Thin-film shape-memory alloy actuated micropumps. Journal of Microelectromechanical Systems, 1998. 7(2): p. 245-251.