- 期刊
市售四種微填複合樹脂的一些機械性質之比較
Comparison of Some Mechanical Properties of Four Commercial Microfilled Composite Resin
若您是本文的作者，可授權文章由華藝線上圖書館中協助推廣。
摘要
市售四種微埴複合樹脂在乾燥狀況下與潮濕狀況下貯存七天，再分別測試其三種機械性質：抗壓強度，抗張強度與撓苗強度。結果吸水性有意義的降低了材料的撓曲強度。
關鍵字
無資料並列摘要
”Four commercial light-cured microfilled composite resins were tested respectly after 7days drying or immersing in distilled water at 37℃ Three mechanical properties: compressive strength, diametral tensile strength, and transverse strength were exemined. The transverse strength was significantly influenced by water sorption.”
延伸閱讀
- 許峻輔（2018）。探討不同光安定劑於光固型環氧樹脂/無機層狀奈米複材之製備與性質〔碩士論文，中原大學〕。華藝線上圖書館。https://doi.org/10.6840/cycu201800618
- 孫添福（2007）。無機聚合樹脂應用於RC梁FRP貼片剪力補強之研究〔碩士論文，國立臺北科技大學〕。華藝線上圖書館。https://doi.org/10.6841/NTUT.2007.00206
- 陳載永、吳俊萍（1993）。速生樹種木材製造粒片板之研究（IV-4）－聚脲酯膠合劑之聚乙二醇與聚異氰酸鹽混合比對粒片板性質之影響。林產工業，12(1)，89-99。https://doi.org/10.6561/FPI.1993.12(1).6
- 巫宇恆（2020）。The Applications of Ceramic Matrix Composite Materials〔碩士論文，淡江大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0002-2406202021425600
- Percoco, G., Lavecchia, F., & Galantucci, L. M. (2012). Compressive Properties of FDM Rapid Prototypes Treated with a Low Cost Chemical Finishing. Research Journal of Applied Sciences, Engineering and Technology, 4(19), 3838-3842. https://www.airitilibrary.com/Article/Detail?DocID=20407467-201210-201512070007-201512070007-3838-3842