若您是本文的作者，可授權文章由華藝線上圖書館中協助推廣。
並列摘要
The temperature effect for big molding body will cause shrinkage and warping of barrel. This paper presents a CAD method, it is based on pro-engineering design with practice experience, to improve accuracy, roughness and correct appearance of barrel. By means of application of practice manufacturing, the high quality of barrel product was obtained.
延伸閱讀
- 王佰祥、陳俊達（1994）。盛鋼桶預熱作業改善。鑛冶：中國鑛冶工程學會會刊，38(3)，55-68。https://www.airitilibrary.com/Article/Detail?DocID=04510011-199409-201911140006-201911140006-55-68
- 彭建斌（2009）。汽缸壁拋光專用機之設計與驗證研究(II)：夾具與進給機構〔碩士論文，國立臺北科技大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0006-1607200915202300
- 黃振東、林惠娟、黃文星、林巖騫（1988）。盛鋼桶氣體攪拌處理的流動分析。鑛冶：中國鑛冶工程學會會刊，32(4)，50-60。https://doi.org/10.30069/MM.198812_32(4).0007
- 林建鋒（2007）。Measurement of Mold Clamping Force in Plastic Injection〔碩士論文，崑山科技大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0025-0306200810425714
- 劉俊杰（2011）。Fabrication of Ceramic Mold Using New Rapid Prototyping Process〔碩士論文，國立臺北科技大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0006-1608201114002200