工研院風機測試系統介紹

Introduction of ITRI Fan Testing Laboratory

翁淩家 ； 吳世國 ； 曾鵬樟

《通風設備與工程》 4期 (2010/12) Pp. 63-65

https://doi.org/10.29795/TFSBYGC.201012.0012

摘要

本文主要目的係介紹工研院風機測試實驗室及目前測試能量狀況。本風機測試貴驗室係依攝AMCA210之Fig.12與Fig.15建置，其最大風量可測至3000CMM而最大壓力是500mmAq。於Fig.12可測之風機最大直徑為1.15m，而Fig.15可測之風機最大直徑為2m。目前風機測試設備已完成建置，與其他實驗室的能力比對亦已完成，未來工作將著重於進行AMCA風機實驗室認證。

關鍵字

美國通風協會 ； 通風系統實驗室 ； 實驗室認證

並列摘要

The main purpose of this article is to describe the fan tes ting laboratory of ITRJ and its currently testing capacity. This fan testing lab was established according to Fig. 12 & Fig. 15 of AMCA 210. The maximum testing Bowrate is 3000CMM and the maximum testing pressure is 500mmAq. For the testing chamber established according to Fig.12 ofAMCA 210, it can test a fan which maximum diameter is 1.15m. For a fan conduct the Fig 15 of AMCA 210 test, the maximum diameter of the fan is 2m. The testing facilities have been constructed and proficiency test has been done as well. In the future work focus on the AJ.\1CA fan laboratory certification.

並列關鍵字

AMCA, Air Movement and Control Association ； Ventilation Systems Laboratory ； laboratory certification