|
[1] K. Ramanathan, M. A. Contreras, C. L. Perkin, S. Asher, F. S. Hasoon, J. Keane, D. Young, M. Romero, W. Metzger, R. Noufi, J. Ward, and A. Duda, “Prpperties of 19.2% efficiency ZnO/CdS/CuInGaSe2 Thin-film Solar Cells”, Progress in Photovoltaics: Research and Applications, Vol. 11, pp. 225-291, (2003). [2] D. Schmid, M. Ruckh, F. Grunwald, and H. W. Schock, “Chalcopyrite/defect Chalcopyrite Heterojunctions on the Basis of CuInSe2”, J. Appl. Phys., Vol. 73, pp. 2902-2909, (1993). [3] M. A. Contreras, J. Tuttle, A. Gabor, A. Tennant, K. Ramanathan, S. Asher, A. Franz, J. Keane, L. Wang, J. Scofield, and R. Noufi, ”High Efficiency Cu(In,Ga)Se2-Based Solar Cells: Processing of Novel Absorber Structures”, Proc. 1st World Conf. Photovolt. Energy COnv., IEEE, Piscataway, NJ., pp. 68, (1994). [4] A. M. Gabor, J. R. Tuttle, D. S. Albin, M. A. Contreras, and R. Noufi and A. M. Hermann, “High-efficiency CuInxGa1-xSe Solar Cells Made from (Inx,Ga1-x)2Se3 Precursor Films”, Appl. Phys. Lett., Vol. 65, pp. 198-200, (1994). [5] M. Marudachalam, H. Hichri, R. Klenk, R. W. Birkmire, W. N. Shafarman, and J. M, Schultz, “Preparation of Homogeneous Cu(InGa)Se2 Film by Selenization of Metal Precursors in H2Se Atmosphere”, Appl. Phys. Lett., Vol. 67, pp. 3978-3980, (1995). [6] A. M. Hermann, C. Gonzalez, P. A. Ramakrishnan, D. Balzar, N. Popa, B. Rice, C. H. Marshall, J. N. Hilfiker, T. Tiwald, P. J. Sebastian, M. E. Calixto, and R. N. Bhattacharya, “Fundamental Studies on Large Area Cu(In,Ga)Se2 Films for High Efficiency Solar Cells”, Sol. Energy Mater. Sol. Cells, Vol. 70, pp. 345-361, (2001). 82 [7] J. Zank, M. Mehlin, and H. P. Fritz, “Electrochemical Codeposition of Indium and Gallium for Chalcopyrite Solar Cells”, Thin Solid Films, Vol. 286, pp. 259-263, (1996). [8] K. T. Ramakrishna Reddy, P. K. Datta, and M. J. Carter, ”Defection of Crystalline Phases in CuInSe2 Films Grown by Selenisation Process”, Phys. Stat. Sol. (a), Vol. 182, pp. 679-685, (2000). [9] F. O. Adurodija, J. Song, S. D. Kim, S. H. Kwon, S. K. Kim, K. H. Yoon, and B. T. Ahn, “Growth of CuInSe2 Thin Films by High Vapour Se Treatment of Co-sputtered Cu-In Alloy in a Graphite Container”, Thin Solid Films, Vol. 338, pp. 13-19, (1999). [10] M. Marudachalam, R. W. Birkmire, H. Hichri, J. M. Schultz, A. Swartzlander, and M. M. Al-Jassim, “Phases, Morphology, and Diffusion in CuInxGa1-xSe2 Thin Films”, J. Appl. Phys., Vol.82, pp. 2896-2905, (1997). [11] C. Guillén, M. A. Martínez, and J. Herrero, “CuInSe2 Thin Films Obtained by a Novel Electrodeposition and Sputtering Combined Method”, Vacuum, Vol. 58, pp. 594-601, (2000). [12] T. L. Chu, S. S. Chu, S. C. Lin, and J. Yue, “Large Grain Copper Indium Diselenide Films”, J. Electrochem. Soc., Vol. 131, pp. 2182-2185, (1984). [13] F. N. Rhines, Phase Diagrams in Metallurgy, McGraw & Hall, New York, (1956). [14] A. Bolcavage, S. W. Chen, C. R. Kao, and Y. A. Chang, “Phase Equilibria of the Cu-In System I: Experimental Investigation”, Journal of Phase Equilibria, Vol. 14, No. 1, pp. 14-21, (1993). [15] C. R. Kao, A. Bolcavage, S. -L. Chen, S. W. Chen, and Y. A. Chang, “Phase Equilibria of the Cu-In System II: Thermodynamic Assessment and Calculation of Phase Diagram”, Journal of Phase 83 Equilibria, Vol. 14, No. 1, pp. 22-30, (1993). [16] H. Okamoto, Binary Alloy Phase Diagram, ASM International, pp. 2288, (1990). [17] D. J. Chakrabarti and D. E. Laughlin, Bull. Alloy Phase Diagrams, Vol. 2, No. 3, (Dec 1981). [18] T. Gödecke, T. Haalboom and F. Ernst, “Phase Equilibria of Cu-In-Se I. Stable States and Nonoequilibrium States of the In2Se3- Cu2Se Subsystem”, Z. Metallkd. Vol. 91, No. 8, pp. 622-634, (2000). [19] T. Gödecke, T. Haalboom and F. Ernst,” Phase Equilibria of Cu-In-Se II. The In-In2Se3-Cu2Se-Cu Subsystem”, Z. Metallkd. Vol. 91, No. 8, pp. 635-650, (2000). [20] T. Gödecke, T. Haalboom and F. Ernst, “Phase Equilibria of Cu-In-Se III. The In2Se3-Se-Cu2Se Subsystem”, Z. Metallkd. Vol. 91, No. 8, pp. 651-662, (2000). [21] C. -L. Tsao and S. -W. Chen, “Interfacial Reactions in the Liquid Diffusion Couples of Mg/Ni, Al/Ni and Al/(Ni)-Al2O3 Systems”, J. Mater. Sci, Vol. 30, pp. 5215-5222, (1995). [22] J. B. Clark, “Conventions for Plotting Diffusion Paths in Multiphase Ternary Diffusion Couples on Isothermal section of a Ternary Phase Diagram”, Trans. Met. Soc. AIME, Vol. 227, pp. 1250, (1963). [23] S. W. Chen and C. H. Wang, “Interfacial Reactions of Sn-Cu/Ni Couples at 250℃”, J. Mater. Res., Vol. 21, No. 9, pp. 2270, (2006). [24] W. T. Chen, C. E. Ho and C. R. Kao, “Effect of Cu Concentration on the Interfacial Reactions between Ni and Sn-Cu Solders”, J. Mater. Res., Vol. 17, No. 2, pp. 263, (2002). [25] C. H. Lin, S. W. Chen, and C. H. Wang, “Phase Equilibra and 84 Solidification Properties of Sn-Cu-Ni Alloys”, J. Electron. Mater., Vol. 31, No. 9, pp. 907, (2002). [26] R. E. Reed-Hill, R. Abbaschian, Physical Metallurgy Principle, 3rd edition, PWS, Boston, pp. 365-367, (1994). [27] C. R. Kao, Materials Science and Engineering A, Vol. 238, pp. 196-201, (1997). [28] C. H. Wang, S. W. Chen, C. H. Chang, J. C. Wu, Metallurgical and Materials Transactions A, Vol. 34, pp. 199-209, (2003). [29] D. Bhattacharyya, S. Bocking, M. J. Carter, “Detection of Binary Phases in CuInSe2 Films formed by Laser Annealing of Stacked Elemental Layers of In, Cu and Se”, Journal of Materials Science, Vol. 31, pp. 5451-5456, (1996). [30] S. C. Park, D. Y. Lee, B. T. Ahn, K. H. Yoon, J. Song, “Fabrication of CuInSe2 Films and Solar Cells by the Sequential Evaporation of In2Se3 and Cu2Se Binary Compounds”, Vol. 69, pp. 99-105, (2001). [31] W. K. Kim, S. Kim, E. A. Payzant, S. A. Speakman, S. Yoon, R. M. Kaczynski, R. D. Acher, T. J. Anderson, O. D. Crisalle, S. S. Li, V. Craciun, “Reaction Kinetics of α-CuInSe2 formation from an In2Se3/CuSe Bilayer Precursor Film”, Journal of Physics and Chemistry of Solids, Vol. 66, pp. 1915-1919, (2005). [32] S. Kim, W. K. Kim, R. M. Kaczynski, R. D. Acher, S. Yoon, T. J. Anderson, and O. D. Crisalle, “Reaction Kinetics of CuInSe2 Thin Film Grown from Bilayer InSe/CuSe Precursors”, J. Vac. Sci. Technol. A, Vol. 23, No. 2, pp. 310-315, (Mar/Apr 2005). [33] S. Sommadossi, W. Gust and E. J. Mittemeijer, “Phase characterization and Kinetic Behaviour of Diffusion Soldered Cu/In/Cu Interconnections”, Materials Science and Technology, Vol. 19, (April 2003). 85 [34] K. Lu, M. L. Sui, and J. H. Perepezko, “The Kinetics of Indium/Amorphous-selenium Multilayer Thin Film Reactions”, J. Mater. Res., Vol. 14, No. 3, (Mar 1999). [35] S. Bandyopadhyaya, S. Roy, S. Chaudhuri, and A. K. Pal, ”CuIn(SxSe1-x)2 Films Prepared by Graphite Box Annealing of In/Cu Stacked Elemental Layers”, Vacuum, Vol. 62, pp. 61-73, (2001). [36] C. Guillén and J. Herrero, “Sructure, Morphology and Photoelectrochemical Activity of CuInSe2 Thin Films as Determined by the Characteristics of Evaporated Metallic Precursors”, Sol. Energy Mater. Sol. Cells, Vol. 73, pp. 141-149, (2002). [37] J. Bekker, V. Alberts, A. W. R. Leitch, and J. R. Botha, “Properties of CuIn(Se,S)2 Thin Films Prepared by Two-step Growth Processes”, Thin Solid Films, Vol. 431-432, pp. 116-121, (2003). [38] D. -G. Kim, C. -Y. Lee, S. -B. Jung, “Interfacial Reactions and Intermetallic Compound Growth between Indium and Copper”, Journal of Materials Science: Materials in Electronics, Vol. 15, pp. 99-98, (2004). [39] C. L. Yu, S. S. Wang, and T. H. Chuang, “Intermetallic Compounds Formed at the Interface between Liquid Indium and Copper Substrates”, Journal of Electronic Materials, Vol. 31, No. 5, (2002). [40] J. S. Park, Z. Dong, Sungtae Kim, and J. H. Perepezko, ”CuInSe2 Phase Formation During Cu2Se/In2Se3 Interdiffusion Reaction”, Journal of Applied Physics, Vol. 87, No. 8, pp. 3683-3690, (April 2000).
|