- 期刊
酸性含氟凝膠對複合樹脂表面之影響
Effects of Acidulated Phosphate Fluoride Gels on the Surface of Composite Resins
摘要
In this study, we evaluated the interactions between different composite resins and different APE gels. Five different brands of fluoride agents (Topical Jonoflour, Topex, Fluoride gel, 60 SECOND Taste gel, and Fluorident gel) were assessed in the study. These materials were applied to 4 different composite resins (Clearfil AP-X, Tetric Ceram, Filtek Z350, and Grandio). The study examined surface morphological changes of the composite resins when exposed to the APE agents. The fluoride changes in surface roughness (Ra) and surface morphology using a surface profilometer and scanning electron microscopy (SEM). We reached the following conclusions. (1)The severity of influence of APF gels on composite resin surfaces is material dependent. (2)The surface roughness or morphological changes of the nano-composite resin was also affected as that of the hybrid or nano-hybrid composite resins when APF gels were applied. The loss or dissolution of the filler and matrix corresponding to increasing porosity and surface roughness was noted to have occurred to various extents.
並列摘要
In this study, we evaluated the interactions between different composite resins and different APE gels. Five different brands of fluoride agents (Topical Jonoflour, Topex, Fluoride gel, 60 SECOND Taste gel, and Fluorident gel) were assessed in the study. These materials were applied to 4 different composite resins (Clearfil AP-X, Tetric Ceram, Filtek Z350, and Grandio). The study examined surface morphological changes of the composite resins when exposed to the APE agents. The fluoride changes in surface roughness (Ra) and surface morphology using a surface profilometer and scanning electron microscopy (SEM). We reached the following conclusions. (1)The severity of influence of APF gels on composite resin surfaces is material dependent. (2)The surface roughness or morphological changes of the nano-composite resin was also affected as that of the hybrid or nano-hybrid composite resins when APF gels were applied. The loss or dissolution of the filler and matrix corresponding to increasing porosity and surface roughness was noted to have occurred to various extents.
延伸閱讀
- 蘇瑜、李勝揚、陳敏慧、盧幼情、葉淑端（2004）。專業用塗氟製劑對複合樹脂表面型態之影響。中華牙醫學雜誌，23(4)，276-285。https://doi.org/10.7105/CDJ.200408.0276
- 楊世安（2018）。氟離子對AZ91D錳酸鹽化成皮膜結構與抗蝕性之影響〔碩士論文，國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU201803500
- Lo, T. Y. (2015). 含氟之高性能聚亞醯胺薄膜之表面特性分析與 應用 [doctoral dissertation, National Chiao Tung University]. Airiti Library. https://doi.org/10.6842/NCTU.2015.00170
- 陳亮如（2002）。局部塗氟製劑對含樹脂類填補材料表面糙度的影響。中華民國兒童牙科醫學會雜誌，2(3)，49-57。https://doi.org/10.6319/JTAPD.2002.2(3).3
- Borges, A. B., Torres, C. R. G., Souza, P. A. B. D., Caneppele, T. M. F., Santos, L. F. T. F., & Magalhães, A. C. (2012). Bleaching Gels Containing Calcium and Fluoride: Effect on Enamel Erosion Susceptibility. International Journal of Dentistry, 2012(), 302-307-040. https://doi.org/10.1155/2012/347848