- 期刊
- OpenAccess
Effect of Different Light-Curing Sources on Diametral Tensile Strength of Bulk Fill Composite Resins
摘要
There are two common sources of light curing used to polymerize composite resins, the LED (Light Emitted Diode) and the QTH (Quartz Tungsten Halogen). This study aimed to evaluate the effect of using different light curing sources on diametral tensile strength of bulk fill composite resins. Three commercial bulk fill composite resins, Tetric N-Ceram Bulk Fill (Ivoclar-Vivadent, Liechtenstein, Germany), Beautifil-Bulk Restorative® (Shofu, Japan), and Filtek^(TM) Bulk-Fill (3MESPE, USA) were used to make disk specimens (6 mm in diameter, 3 mm in thickness) divided into two different polymerized groups (n=10), with LED for 20s and QTH for 40s light curing sources. Diametral tensile strength was tested using a Universal Mechanical Testing Machine (Shimadzu, Japan). Data were analyzed using one way ANOVA and Bonferonni post hoc tests. The results showed that diametral tensile strength mean value of all bulk fill composite resins polymerized using LED source were higher than QTH. There was no statistically difference between the group polymerized using LED and QTH (p ≥ 0.05), except in Filtek^(TM) Bulk-Fill group (p = 0.012). It can be concluded that different light-curing sources can influence the polimerization effect of Bulk-Fill composite resin in their diametral tensil strength properties.
延伸閱讀
- 吳秉鋐（2010）。A Study on the Synthesis, Functional and Thermal Properties of Composites with CDS and phosphorus Components〔碩士論文，國立臺北科技大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0006-0508201014210600
- Shamszadeh, S., Eslamian, S. M. S. A., Hasani, E., Abrandabadi, A. N., & Panahandeh, N. (2016). Color Stability of the Bulk-Fill Composite Resins with Different Thickness in Response to Coffee/Water Immersion. International Journal of Dentistry, 2016(), 296-300. https://doi.org/10.1155/2016/7186140
- Tsai, C. Y. (2019). Influence of Substrate Treatments and Coating Methods on Surface Characteristics of Cellulose Films [master's thesis, National Taiwan University]. Airiti Library. https://doi.org/10.6342/NTU201901557
- Chen, W. C., Ko, C. L., & Shih, C. J. (2014). Surface Modified Characteristics of the Tetracalcium Phosphate as Light-Cured Composite Resin Fillers. Journal of Nanomaterials, 2014(), 861-869-391. https://doi.org/10.1155/2014/709482
- 林威廷（2018）。Effect of bioactivity of surface topography and coating forming by infrared light-induced on titanium〔碩士論文，中山醫學大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0003-2206201813053900