並列摘要
This paper developed an active scanning probe array. The probe array consists of 16×2 probes thermally actuating and sensing. The 32 probes are integrated with Ti/Pt temperature sensors and bimorph thermal actuators. Each probe is a Si3N4 cantilever equipped with a sharp nano scale pyramid tip at its free end. When one of the probes is actuated, its neighboring probes can provide temperature sensing feedback. The temperature coefficient of resistance (TCR) of the embedded Ti/Pt sensor of each probe is 2100 ppm ℃^(-1), and the micro thermal actuator shows good reliability after 500 cycles over specification continuous actuating test.
延伸閱讀
- Huang, C. Y. (2013). Arterial Pressure Waveform Monitoring System Design Based on Sensor Array [master's thesis, National Taiwan University]. Airiti Library. https://doi.org/10.6342/NTU.2013.00411
- 吳裕弘（2008）。FABRICATION OF THE CAPACITIVE PRESSURE SENSOR BY THE HOT EMBEDDING TECHNOLOGY〔碩士論文，大同大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0081-0607200917245319
- Chang, C. L. (2014). A Multi-Input Thermoelectric Energy Harvesting System [master's thesis, National Taiwan University]. Airiti Library. https://doi.org/10.6342/NTU.2014.10122
- 熊永式（2010）。A 8×32 CMOS MEMS Capacitive Tactile Sensor Array〔碩士論文，國立清華大學〕。華藝線上圖書館。https://doi.org/10.6843/NTHU.2010.00510
- 蔣境昇（2002）。Study and Fabrication on 1x4 Linear Array pH-Sensitive Sensor〔碩士論文，中原大學〕。華藝線上圖書館。https://doi.org/10.6840/cycu200200113