建置RFID技術整合供應鏈物流管理暨系統模擬分析－以TFT-LCD產業為例

The Establish of RFID Technology for Management Processes on Logistics of Supply Chain and System Simulation-Taking TFT-LCD Industry as an Example

林懿貞(Yi-Chen Lin) ； 江勝榮(Robert S. Chiang) ； 楊肇銘(Chao-Ming Yang)

《電子商務學報》 10卷2期 (2008/06) Pp. 437-464

https://doi.org/10.6188/JEB.2008.10(2).06

摘要

本研究以協同供應鏈物流及導入RFID技術為主，探討RFID技術導入其供應鏈物流作業流程，並使用百法論整合供應鏈與物流。而本研究主要是利用文獻探討、SCOR Model改造設計、專家訪談及個案探討等百式進行。本研究結果將分成三面向做為分析：(1)以分析透過RFTD的物流作業，並且描述出在TFT-LCD產業使用RFTD技術的經濟效率(2)在供應鏈作業標準參考模式(SCOR)提供－系統化及綜合性架構下，本研究應用SCOR Mode流程找出供應鏈不良因子，針對不良因素提供改善方針，分析廠商供應鏈績效，進一步以供應鏈流程改造設計，發展出最佳廠商的供應鏈作業模式(3)以系統模擬的方式模擬出導入RFID技術後的廠商作業流程。

關鍵字

薄膜電晶體液晶顯示器 ； 供應鏈物流 ； SCOR ； 無線射頻技術 ； 模擬系統

並列摘要

In this paper, the major concern is the logistics of collaborative supply chain and application of RFID technology. The purpose is to study how the enterprise can solve the problems while adopting RFID technology in their operation processes of supply chain. We used a methodology for integrating the supply chain and logistics. The study used literature review、SCOR model for design、carrying on the interview way of experts, and case study etc. The research concludes three points: (1) This research aims to analyze logistics processes through RFID. The benefit to use RFID technology for TFT-LCD industry is also presented. (2) Supply Chain Operations Reference model provides a systematic and comprehensive framework to measure a firm's performance measurement from different dimensions in the supply chain environment. The SCOR Model is used to find out un-effective factors and further provides suggestions. The supply chain performance is also evaluated for process reengineering. Finally, the To-Be supply chain mod el is presented. (3) The system simulation method is used to present the process with RFID technology.

並列關鍵字

TFT-LCD ； SCM ； SCOR ； REID ； System Simulation

參考文獻

Alvarado, U.Y.,Kotzab, H.(2001).Supply chain management-The integration of logistics in marketing.Industrial Marketing Management.30(2),183-198.

Asce, A.M.,Jaselskis, E.J.,Tarek, E.M.(2003).Implementing radio frequency identification in the construction process.Journal of Construction Engineering and Management.129(6),680-688.

Brewer, A.,Sloan, N.,Landers, T.L.(1990).Intelligent tracking in manufacturing.Journal of Intelligent Manufacturing.10(3-4),245-250.

Carroll, J.M.(2000).Five reasons for scenario-based design.Interaction with Computers.13(1),43-60.

Chao, CC.,Jen, W.Y.,Yang, J.M.(2007).Determining technology trends and forecasts of RFID by a historical review and bibliometric analysis from 1991 to 2005.Technovation.27(5),268-279.