In-situ Temperature Effects in Basic Oxygen Furnace Slag Asphalt Concrete Pavement

Long-Sheng Huang ； Gui-Lian Zou ； Huan-Lin Luo ； Chien-Chiao Chao

《International Journal of Pavement Research and Technology》 6卷4期 (2013/07) Pp. 386-394

https://doi.org/10.6135/ijprt.org.tw/2013.6(4).386

並列摘要

Basic oxygen furnace (BOF) slag is a by-product of steel plants and is different from conventional natural aggregates. Studies have shown that BOF slag asphalt concrete is able to store heat. However, no quantitative research results have been presented. In this study, conventional natural aggregates and reclaimed asphalt pavement (RAP) are replaced by BOF slag in an asphalt concrete mixture. To observe the temperature variations in BOF slag asphalt concrete pavement during construction and after being opened to traffic, test roads with different levels of BOF slag and RAP were constructed in Kaohsiung City, Taiwan. The goal of this study was to provide information about the temperature differences between asphalt concrete pavement containing natural aggregates and those containing BOF slag aggregates. The results of this research indicate that for the same transportation time and distance, the temperature of asphalt concrete pavement with 40% BOF slag was approximately 7°C higher than that with 0% BOF slag. Because the internal heat energy of pavement with a large amount of BOF slag is not easily released, a longer curing time is needed after rolling compaction of the pavement, and thus, a longer time is needed before the BOF slag pavement can be opened to traffic. The temperature required to open the pavement to traffic was approximately 65°C. Furthermore, after opening the road to traffic, temperatures at depths of 3 and 5 cm in pavement with 40% BOF slag were 2 to 4°C lower than at the same depths in pavement with 0% BOF slag.

並列關鍵字

Basic oxygen furnace (BOF) slag ； Durability ； Reclaimed asphalt concrete ； Temperature

參考文獻

Huang, L.S. and Lin, D.F. (2011). Influence of Cooling Efficiency of Basic Oxygen Furnace Slag Used in Recycled Asphalt Concrete, International Journal of Pavement Research and Technology, 4(6), pp. 347-355.

Huang, L.S. and Kang, Y.V. (2010). Nondestructive Evaluation of Thickness and Bearing Capacity of Roadway Pavement Structure, International Journal of Pavement Research and Technology, 3(6), pp. 311-319.

Shen, D.H., Wu, C.M., and Du, J.C. (2009). Laboratory Investigation of Basic Oxygen Furnace Slag for Substitution of Aggregate in Porous Asphalt Mixture, Construction and Building Materials, 23(1), pp. 453-461.

Xue, Y., Wu, S., Hou, H. and Zha, J. (2006). Experimental Investigation of Basic Oxygen Furnace Slag Used as Aggregate in Asphalt Mixture, Journal of Hazardous Materials, 138(2), pp. 261-268.

Wu, S., Xue, Y., Ye, Q. and Chen, Y. (2007). Utilization of Steel Slag as Aggregates for Stone Mastic Asphalt (SMA) Mixtures, Building and Environment, 42(7), pp. 2580-2585.