- 期刊
- OpenAccess
Theoretical Study on Real Tooth Surface of Novel Toroidal Worm by the Forming Method
並列摘要
The aim of this paper is to validate the rationality of the forming method for the worm surface in a novel toroidal worm-gearing with spherical meshing elements, which is made up of worm, steel balls and worm gear. Based on the directrix of worm surface, the mathematic model of worm surface is established and the directrix-based forming method for machining worm surface is proposed. Further, the principle error in the machining process is analyzed and the theoretic and real tooth surfaces of worm are fitted and compared on Open GL platform. The results show that the tooth profile error can be controlled at the range of 0~1×10^(-5)mm and it is always 0 at the pressure angle.
延伸閱讀
- Hou, G. L., Hung, C. C., Yang, Y. H., Tsai, C. C., Chen, P. H., & Shieh, T. Y. (2003). Topographic Study of Extracted Molars with Advanced Furcation Involvement: Furcation Entrance Dimension and Molar Type. The Kaohsiung Journal of Medical Sciences, 19(2), 68-74. https://doi.org/10.6452/KJMS.200302.0068
- 駱建成（2012）。Characterization of the Modified Curvilinear Gear Set on Tooth Contact Stress and Loaded Transmission Errors〔碩士論文，國立中央大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0031-1903201314455156
- Wei, Y. Q., Liu, Y. P., Ma, D. Q., & Hou, L. (2018). Research on Thermal Elastohydrodynamic Lubrication of Cylindrical Gears with Curvilinear Shaped Teeth. 中國機械工程學刊, 39(5), 451-458. https://www.airitilibrary.com/Article/Detail?DocID=02579731-201810-201812100006-201812100006-451-458
- Han, J., Li, D., Gao, T., & Xia, L. (2015). Research on Obtaining of Tooth Profile of Non-circular Gear Based on Virtual Slotting. Proceedings of the 14th IFToMM World Congress, (), 229-233. https://doi.org/10.6567/IFToMM.14TH.WC.PS6.001
- 張友信（2017）。Characteristics Study of the Tooth Profile Modification of Cycloid Gear〔碩士論文，國立虎尾科技大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0028-2408201710435100