- 期刊
- OpenAccess
Elastic Plastic Stress Distributions in Weld-bonded Lap Joint under Axial Loading
並列摘要
Weld-bonding process is increasingly used in many industries such like automobile and aerospace. It offers significant improvements of sheet metal joints in static, dynamic, corrosion, noise resistance, stiffness and impact toughness properties. A full understanding of this process, including the elastic-plastic stress distribution in the joint, is a must for joints design and automation of manufacturing. Also, the modelling and analysis of this process, though it is complex, proves to be of prime importance. Thus, in this study a systematic experimental and theoretical study employing Finite Element Analysis (FEA) is conducted on the weld-bonded joint, fabricated from Austenitic Stainless steel (AISI 304) sheets of 1.00 mm thickness and Epoxy adhesive Araldite 2011, subjected to axial loading. Complete 3-D finite element models are developed to evaluate the normal, shear and triaxial Von Mises stresses distributions across the entire joint, in both the elastic and plastic regions. The, needed quantities and properties, for the FE modelling and analysis, of the base metals and the adhesive, such like the elastic-plastic properties, modulus of elasticity, fracture limit, the nugget and Heat Affected Zones (HAZ) properties, etc., are obtained from the experiments. The stress distribution curves obtained are found to be consistent with those obtained from the FE models and in excellent agreement with the experimental and theoretical published data, particularly in the elastic region. Furthermore, the stress distribution curves obtained for the weld-bonded joint display the best uniform smooth distribution curves compared to those obtained for the spot and bonded joint cases. The stress concentration peaks at the edges of the weld-bonded region, are almost eliminated resulting in achieving the strongest joint.
並列關鍵字
Adhesives ； bonding ； FE modeling ； Heat Affected Zones (HAZ) ； joining ； spot welding ； stress distribution ； weld-bonding延伸閱讀
- 鄭榮和、范姜士炳（1995）。Study of Mechanical Properties of Hollow Structures Manufactured by Superplastic Forming and Diffusion Bonding Methods。中國航空太空學會學刊，27(3)，201-211。https://doi.org/10.6124/TAASRC.199509_27(3).04
- Wai, K. Y. (1966). Elastic analysis of coupled shear-walls subject to lateral loads [master's thesis, The University of Hong Kong]. Airiti Library. https://www.airitilibrary.com/Article/Detail?DocID=U0029-1812201200009111
- 陳見宏（2007）。The elastic, plastic and thermal mismatch effect on the mechanical properties and stress distribution〔碩士論文，大同大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0081-0607200917241915
- Kuang, J. S. (1988). Elastic and elasto-plastic analysis of shear wall and core wall structures [doctoral dissertation, The University of Hong Kong]. Airiti Library. https://www.airitilibrary.com/Article/Detail?DocID=U0029-1812201200007105
- 朱淳衛（2009）。Study on the Influence of Weld-line Strength in Molding Process and PC+ABS Material Property〔碩士論文，中原大學〕。華藝線上圖書館。https://doi.org/10.6840/cycu200900080