運用知識庫輔助GPS測量指派作業研究

The Research of Using Knowledge-Based for GPS Logistical Scheme

洪本善(Pen-Shan Hung) ； 葉昭憲(Chao-Hsien Yeh) ； 陳立邦(Li-Pang Chen)

《地籍測量：中華民國地籍測量學會會刊》 23卷1期 (2004/03) Pp. 1-15

https://doi.org/10.29609/YYWYLL.200403.0001

摘要

研究中將GPS作業規劃者之知識及經驗、作業規範，經整理並以C++撰寫成為－GPS網形設計知識庫，經由知識驗證後，得知建構之知識庫可合理的設計網形。規劃者可使用相似之幾何分佈的測點進行知識庫網形設計，以避免人為設計網形可能造成之疏忽。在指派模式方面，由網形設計知識庫所提供各個測段之測點透過指派模式進而再規劃，主要是以分段指派之方式進行，可成功指派各組別至下個測段的施測順序。

關鍵字

知識庫 ； 作業研究 ； GPS作業規劃 ； 測量人員指派

並列摘要

In this study GPS project planner's knowledge and experience, standard and specifications of procedures are integrated into a Knowledge Base with a C++ programming. After knowledge-based rules testing, it is found out the Knowledge Base is useful to plan a reasonable GPS network design. The GPS project planner can use similar geometric figure to design network and avoid negligence of artificial operation. In the part of assignment model, Knowledge Base is used to arrange logistical scheme of GPS field survey in whole sessions in accordance with knowledge-based rules. The method can successfully assign field surveyors to visit next stations with cost efficiency no matter what surveyor has any design experience.

並列關鍵字

Knowledge based ； Operation research ； GPS project planning ； Logistical scheme of field survey