透過您的圖書館登入
IP:3.143.17.127
  • 學位論文

水域遊憩載具外型及水下操縱運動性能探討

Study on the Hull Form and Underwater Maneuverability of a Marine Recreation Vehicle

指導教授 : 邱逢琛
若您是本文的作者,可授權文章由華藝線上圖書館中協助推廣。

摘要


本研究主要目的在探討一種可在水面及水下自由航行,享受速度感的水域遊憩載具(Marine Recreation Vehicle; MRV),並可做為巨型遊艇(Mega Yacht)或超級遊艇(Super Yacht)附加遊憩載具的可行性。由於需兼顧水面、水下皆能有良好的操控性能,本研究透過計算流體力學(CFD)分析軟體的輔助,進行載具外型設計,並針對載具進行水面航行速度預估,以及水下流體動力係數計算以便模擬操縱運動。本研究將求解得之水下流體動力係數代入本研究室之前依照日本在船舶操縱運動所建構的MMG模組化數學模式所發展的潛艦六自由度運動數學模式進行水下航行性能預估。惟針對該數學模式,本研究附加修改以適合本論文新設計之載具數學操控模式。 本研究透過計算流體力學分析軟體完成載具於水面及水下航行的優、缺點分析,並設計適合的遊憩載具外型。在水面航行模擬上,完成載具於水面航行的驗證,並完成載具水面航行的速度預估。於水下航行時的流體動力係數求解上,完成操縱所需的流體係數驗證及求解。將解得之載具流體動力係數帶入新設計的載具操縱數學模式,結果顯示於水下航行操縱性能上,直線航行性能可達設計需求;在迴旋測試及ZIG-ZAG模擬上,模擬結果顯示舵板尺寸並非越大越好,大型舵板雖可有效減少迴旋半徑,但水平ZIG-ZAG航行模擬結果則顯示大型舵板之超射角過大,故適當的舵板尺寸才能有良好的操縱性能。綜整本研究的結果,顯示在妥善的載具外型及控制面設計下,是可達到遊憩載具的航速設計要求,並能獲得適當的操縱性能。

並列摘要


Present study aims at developing a Marine Recreation Vehicle (MRV) which can be used to enjoy speedy navigation both on water surface and in underwater, as a recreation vehicle appended to a Mega Yacht or a Super Yacht. In the present study, the CFD software package of FLUENT is applied to evaluate the possibly achieved speed of the designed MRV while running on water surface or in underwater propelled by electrical power of given rate. In addition, the hydrodynamic coefficients of the vehicle in underwater are also calculated by FLUENT. These coefficients are substituted into a mathematical model to simulate its maneuvering motions in underwater. The mathematical model was developed in a previous study and some modifications are given in the present study for applying to the MRV. Turning circle maneuvers and Zig-zag maneuvers are simulated for investigating the maneuverability of the proposed MRV. It is confirmed that the present design of the hull form and control surfaces can meet both requirements of speed on water surface and in underwater. Furthermore, proper maneuverability can be also achieved.

參考文獻


[8] 邱逢琛, 連昱楊,振動翼之流體動力分析,台灣大學工程科學及海洋工程學系暨研究所.2008/6
[7] 邱逢琛, 張政傑,串列式雙振動翼助推器設計改良之研究,台灣大學工程科學及海洋工程學系暨研究所. 2010/7
[1] 邱逢琛, 蔡旻育,水下滑翔機之流體動力分析,台灣大學工程科學及海洋工程學系暨研究所. 2007/7
[9] 邱逢琛, 張祐鴻,潛鑑運動數學模式之建構與模擬,台灣大學工程科學及海洋工程學系暨研究所. 2006/1
[2] FLUENT Version 6.3 User's Guide.

被引用紀錄


江宜澤(2015)。應用計算流體力學方法探討船舶流體動力係數及操縱性能之研究〔碩士論文,國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU.2015.01435
尤俊傑(2013)。可裝卸式水上腳踏車之概念設計與性能分析之研究〔碩士論文,國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU.2013.11040
歐建豪(2012)。快艇航行姿勢與阻力預估之數值模擬探討〔碩士論文,國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU.2012.02047

延伸閱讀