隨著科技的蓬勃發展,生醫電子也逐漸的和許多產品結合,將穿戴式行動通訊產品加入生醫晶片用以偵測各種生理訊號,用以協助使用者得知目前生理狀況為目的的設計已成為了趨勢。由於此類產品須長時間於戶外使用,而電源來源主要來自電池、體熱發電或是無線電能量收集電路,因此在其傳輸介面電路設計上超低功率消耗成了最重要的考量。 此外,接收器在使用上須長時間維持開啟狀態,占了大半部分的功耗,因此實現一超低功耗接收器便可大幅降低耗電量,延長使用的時間。 本論文提出一超低功耗與可變傳輸速率之頻率鍵移接收器,在傳輸速率上,突破了以往於超低功耗的設計下最快10 Mb/s的限制。另外,依傳輸資料總類的不同,其所需的最佳傳輸速率也不盡相同,而本接收器亦可依據使用者的需求調整其最高接收速率,以達到最佳化的目的。 在傳輸訊號選擇方面,使用了FSK調變解調,其相較於其它調變具有較的低複雜度與較高的抗干擾能力,因此特別適用於超低功耗傳輸系統。延遲電路設計方面,則使用了寬頻電流式放大器電路,實現了電流式的相位位移電路,達到800 μA的電流消耗下,此相位鍵移接收器具有20 Mb/s之資料傳輸速度,以達到超低功率消耗與縮短傳輸所需時間的目的。
An ultra-low power (ULP) frequency shift keying (FSK) receiver had be applied for wearable or implantable physiology sensors in recent years. Comparing to the other signal modulation, FSK provides better immunity against interference. Therefore, the ULP FSK receiver is suitable to provide stable link quality and extend life time of sensors. In this paper, we propose an ultra-low power, high data rate and variable data rate FSK receiver. The ULP FSK receiver was combined by a ULP Front-end and a ULP demodulator. Otherwise, we use current-mode phase shifter to improve bandwidth of the demodulator. High energy efficiency can be achieved by reducing the energy consumption per received bit of FSK receiver. Owing to variable data rate of the FSK demodulator, the power consumption of the FSK receiver can be trade-off for optimization under different operating conditions. The ULP FSK receiver was implemented in 0.18 μm CMOS process. The simulated maximum data rate is 20 Mb/s under power consumption of 1.44 mW. Therefore, the minimum energy consumption of 72 pJ per received bit can be achieved under maximum data rate of 20 Mb/s.
為了持續優化網站功能與使用者體驗,本網站將Cookies分析技術用於網站營運、分析和個人化服務之目的。
若您繼續瀏覽本網站,即表示您同意本網站使用Cookies。