摘要
本研究應用模型試驗分析梯形潰口潰壩時殘留壩體、初始水位、梯形斜率與流量之關係，試驗之潰壩模型置於底床坡降0.01、長14.40m、寬0.755m、渠壁深0.55m之直線矩形渠槽下游端。潰口形狀為梯形斜率為0.2及0.3之梯形。壩體設置可分為三層，第一層為潰口形狀，第二層為一較潰口最大寬度寬之左右對稱雙開門板，第三層為一可向上抽離之隔板，由於抽離之隔板與水體隔開，抽離隔板時可減少隔板對水體所造成之向上的剪應力。並設定垂向殘留壩高0.250m、0.166m、0.125m、0.100m、0.000m以及兩側側向殘留壩單寬0.105m、0.068m、0.030m、0.000m，用以模擬非完全潰壩之現象。
並列摘要
This research applies model tests and numerical simulation to analyze, at dam failure, the relationship between flow rate and the residual dam body. The dam failure test model is located downstream of a linear channel with a bed slope S0 of 0.01, length of 14.40 m and width of 0.755 m. The shape of the breach is Trapezoid with side-slope of 0.2 and 0.3. The dam consists of three tiers, first of which is in the shape of the breach; the second tier is a horizontally symmetric double-door panels wider than the maximum width of the breach. A removable divider that can be pulled up makes the third tier. Removal of the divider separates it from the water body, which reduces the upward shear stress imposed by the divider on the water body. Simulation of a partial dam failure is done by setting the residual dam height to 0.250, 0.166, 0.125, 0.100, and 0.000 m tall and by modifying the side-residual dam body to make the breach width equal to 0.105, 0.068, 0.030 and 0.000 of the channel width.
參考文獻
延伸閱讀
- 許崇銘（2015）。梯形潰口潰壩時殘留壩體與流量關係之研究〔碩士論文，淡江大學〕。華藝線上圖書館。https://doi.org/10.6846/TKU.2015.00876
- 林建杰、羅佳明（2016）。物理模型應用於逆向坡變形與崩壞過程與崩壞之初步研究。土木水利，43(2)，5-10。https://doi.org/10.6653/MoCICHE.201604_43(2).0002
- 林劭儒（2019）。逆向斜交坡中不同節理組特性對楔形岩體變形及破壞機制影響之探討〔碩士論文，國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU201804169
- 林欣怡（2009）。The Influence to Channel Transition of Dam Removal：A Case Study of Baling Dam〔碩士論文，國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU.2009.01148
- 洪耀明、陳勇安、朱冠華、曾建榮、楊瑞昌、劉庭宇（2013）。The Filter Design of Embankment Dam。水保技術，8(3)，165-171。https://www.airitilibrary.com/Article/Detail?DocID=19982275-201307-201403070012-201403070012-165-171