透過您的圖書館登入
IP:18.191.21.86
  • 學位論文

無機聚合樹脂應用於RC梁FRP貼片剪力補強之耐高溫研究

On the Heat Resistance of Shear Strengthened RC Beams by FRP Jacket with Geopolymer

指導教授 : 吳傳威

摘要


近年來,國內外土木工程界於鋼筋混凝土結構修復補強實務中,較常選用之黏接修補材料多以環氧樹脂為主。環氧樹脂良好的黏著性能早已受到證實,但其屬於有機物質材料,不耐高溫的性能卻始終是一項隱憂。前期之研究已多方面探討了一種新開發之「無機聚合樹脂」材料取代環氧樹脂的可行性,強度試驗方面包括混凝土圓柱試體與鋼筋混凝土矩形梁包覆CFRP及GFRP之補強研究,耐高溫試驗方面包括混凝土圓柱試體包覆CFRP及GFRP之耐高溫性能研 究,結果証實的確可發揮相當的補強效果,而其耐高溫方面之性能則遠超過環氧樹脂。 本研究則嘗試以「無機聚合樹脂」替代環氧樹脂作為膠接材料,進行鋼筋混凝土梁包覆FRP補強之耐高溫性能實驗研究,探討剪力補強在高溫後之補強效能。實驗參數包括五種溫度環境(常溫、100℃、250℃、600℃、710℃)、兩種FRP包覆材料(CFRP及GFRP)及兩種包覆層數(一層及兩層)。結果顯示應用無機聚合樹脂包覆FRP鋼筋混凝土梁剪力補強之成效,於常溫下稍低於使用環氧樹脂,而在高溫狀態下,應用無機聚合樹脂者則仍然能維持一定程度之補強效益,因此,在實務上應有發展的空間。

並列摘要


Recently, in the practical structural retrofit, the good adhesive effect of epoxy has been confirmed. Nevertheless, its poor heat resistant property remains a lurking danger. Preceding works have studied the possibility replacing epoxy by inorganic material, namely geoplymer. A series of experiment, including the strength of concrete cylinders and RC beams covered by CFRP and GFRP using geopolymer. And followed by heating resistant experiments, for concrete cylinders confined by CFRP and GFRP using geopolymer. It is found that the results were encouraging. In the present study, it is attempted to a step forward. The effect of shear strengthening of reinforced concrete beams with FRP jacket using geopolymer as bond material after high temperature was investigated. The parameters of the experiments included five different temperatures, i.e. room temperature, 100℃, 250℃, 600℃and710℃, two kinds of FRP jacket material, namely CFRP and GFRP, and two different layers. The results show that under room temperature, the overall shear strengthening effect of the beams is lower than those of using epoxy. However, in all cases the common requirements of shear strengthening are considerably fulfilled. On the other hand, it is worth noting that the strengthening effect still maintained to certain grade under high-temperature for the cases of using geopolymer.

並列關鍵字

Shear strengthening High temperature Geopolymer CFRP GFRP

參考文獻


[44] 孫添福,無機聚合樹脂應用於RC梁FRP貼片剪力補強之研究,碩士論文,台北科技大學土木與防災研究所,2007。
[64] 戴詩潔,高嶺石鋁矽酸鹽聚合材料之研究,碩士論文,國立台北科技大學材料及資源工程系碩士班,台北,2005。
[43] 洪敏盛,火害後混凝土受壓應力應變曲線與鋼筋混凝土短梁之抗剪強度研究,碩士論文,國立成功大學建築研究所,台南,2006。
[29] 吳傳威、鄭大偉、黎光傑,「應用無機聚合樹脂黏結材料包覆玻璃纖維補強混凝土之研究」,第八屆結構工程研討會,日月潭,2006。
[62] 楊欽雄,無機聚合樹脂應用於混凝土試體FRP補強之耐高溫研究,碩士論文,國立台北科技大學土木與防災研究所,2008。

被引用紀錄


孫郁鈞(2014)。火害後鋼筋混凝土建築結構之耐震能力評估〔碩士論文,淡江大學〕。華藝線上圖書館。https://doi.org/10.6846/TKU.2014.01122
陳建任(2009)。RC梁應用環氧樹脂貼覆CFRP剪力補強之耐高溫研究〔碩士論文,國立臺北科技大學〕。華藝線上圖書館。https://doi.org/10.6841/NTUT.2009.00162
劉金衡(2009)。無機聚合膠脂膠合纖維應用於RC梁剪力補強之耐高溫研究〔碩士論文,國立臺北科技大學〕。華藝線上圖書館。https://doi.org/10.6841/NTUT.2009.00078
鄭鵬企(2009)。無機聚合物材料應用於CLSM之研究〔碩士論文,國立臺北科技大學〕。華藝線上圖書館。https://doi.org/10.6841/NTUT.2009.00002
黃彥翔(2010)。混凝土在相變高溫之下抗壓強度之研究〔碩士論文,國立臺北科技大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0006-1608201014400300

延伸閱讀