透過您的圖書館登入
IP:18.117.152.251
  • 學位論文

案例式推理(CBR)對新產品開發與設計作業流程改善之研究

A Study of A Case-Based Reasoning in New Product Development and Design Process Improvement

指導教授 : 張百棧
若您是本文的作者,可授權文章由華藝線上圖書館中協助推廣。

摘要


新產品開發在現今瞬息萬變的環境中,對國家與企業的發展影響甚鉅。對國家而言,新產品開發是提高生產力、競爭力與經濟成長的動力;對企業而言新產品開發則是利潤創造、形象提昇與策略運用的主要來源。因此,新產品開發可謂是國家或企業提昇競爭力與創造競爭優勢所不得不重視的課題。 本研究以案例式推理(Case-Based Reasoning, CBR)的方式選擇現有新產品開發之專案參考資料庫的歷史專案,以縮短與改善新產品開發之流程與品質。從效率與效益的觀點為出發,以系統化的研究了解新產品開發各階段之新產品設計作業與新產品開發流程管理之整合性探討。並從案例式推理為研究心得方向,最後歸納研究心得與建議。

並列摘要


New product development is in the fast changing environment now, the development of the country and enterprise is much influenced the hard iron. As to country, new product development is the motive force of improving productivity, competitiveness and development in economy; it is created that new product development is the profit as to enterprise; the image promotes the main source used with the tactics. So, new product development that the country or enterprises promote the competitiveness with create and compete for the subject had to pay attention to of the advantage. This research is with case type reasoning (Case-Based Reasoning, choose the historical special project of the special project consulting database of existing new product development in way that CBR ), in order to shorten and improve the procedure and quality of new product development. From the view of efficiency and benefit in order to set out, find out about the merger discussions of new product design homework and new product development procedure management at every stage for new product development with systematized research. And in order to study the direction of gains from the case type reasoning (Case-Based Reasoning, CBR), sum up and study the gains and suggestion finally.

參考文獻


[56] 蕭碧茹、洪振方,「案例式推理與科學教學」,物理教育,p.57-74,民國89年7月。
[22] 周文賢、林嘉力著,新產品開發與管理,華泰文化事業股份有限公司,台北,民國九十年。
[38] 張禹晰,「電子電器產品再生策略選定與成本效益評估及智慧型決策支援系統之開發」,國立成功大學資源工程學系,碩士論文,民國九十三年六月。
[65] 魏國章,「以案例式推理作創投之投資決策評估系統」,國立成功大學工業管理科學研究所,碩士論文,民國九十二年六月。
[60] 詹國良,「案例式推理於企業信用評等決策之輔助應用」,國立成功大學工業管理研究所,碩士論文,民國九十一年六月。

被引用紀錄


沈靖傑(2006)。光碟製程設備中射出成型機遠距維護與故障診斷系統初步探討〔碩士論文,國立中央大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0031-0207200917341416
洪蒼博(2007)。分類與案例式推理在PCB瑕疵品之應用〔碩士論文,元智大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0009-2706200721202800
羅志璋(2007)。案例式推理於製造業中階管理人員甄選之應用研究〔碩士論文,國立虎尾科技大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0028-1501201314421350
王峻翊(2007)。應用實驗設計(DOE)與案例式推理理論(CBR)對LCD TV色溫調整製程改善之研究〔碩士論文,元智大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0009-2206200709011100
夏至緯(2009)。運用案例式推理於委外加工費用預測系統建構之研究 – 以DRAM產業為例〔碩士論文,元智大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0009-2807200914285800

延伸閱讀