由於感應加熱相較於傳統直接加熱,具備有加熱速度快、安全性高、產品品質好、幾乎無環境污染等許多優點;另一方面,隨著功率半導體元件製作技術的進步,使轉換器上的功率開關能夠操作在更高頻率的範圍,致使高頻感應加熱裝置具備了輕、薄、短、小、效率高的特色。 本論文以全橋式電路架構為基礎,建構一電壓饋入式電源轉換裝置,應用於串聯負載共振式感應加熱系統上。此電路控制方法係將脈波寬度調變技術、脈波密度調變技術及盲時時間控制等,整合而得。利用脈波寬度調變技術及盲時時間控制方式,使全橋各開關切換時之能量獲得適當的轉移,以降低功率開關之切換損失;以脈波密度調變技術,來增加開關可進行柔切動作的功率範圍。藉此使用混合型PWM控制來增加整體電路效益。 最後對本研究所建構之500W感應加熱系統做操作特性與整體效率方面的說明與量測,並對不同控制方法的結果比較和探討。
Induction heating has the advantages of high efficiency, high quality, and low pollution, and had been used in many applications, especially in the metal treatments. In this study, a load series resonant induction heating system with voltage source full bridge inverter has been constructed. The control scheme is the combination of dead time control, PWM (pulse width modulation) control, and PDM (pulse density modulation) control. The PWM and dead time control can reach energy transferring with less switching loss, and the PDM control can extend the soft-switching operation range. Finally, the control characteristics and whole system efficiency are measured and analyzed on different types of control scheme.
為了持續優化網站功能與使用者體驗,本網站將Cookies分析技術用於網站營運、分析和個人化服務之目的。
若您繼續瀏覽本網站,即表示您同意本網站使用Cookies。