新穎高飽和紅光四價錳摻雜氟化物螢光粉之製備、發光特性鑑定及其照明之應用

Synthesis, Luminescence and Lighting Applications of Novel Highly Saturated Red-Emitting Mn4+ -Doped Fluoride Phosphors

馬晴薇(Ching-Wei Ma)

指導教授 ： 陳登銘

國立交通大學/理學院/應用化學系所/碩士(2016年)

摘要

為改善傳統白光發光二極體 (WLED) 高色溫 (CCT > 4000 K) 與低演色性 (Ra < 80) 之缺失，近年來供暖白光LED封裝與液晶電視背光源所使用之高飽和紅光Mn4+螢光體逐漸興起。Mn4+摻雜氟化物在藍光及紫外光激發下，能放射窄波形紅光，其寬帶激發源自於Mn4+ (d3) 4A2g→4T2g及4A2g→4T1g兩躍遷，其所放射線形紅光則源自於2Eg→ 4A2g躍遷。
本研究以K2MnF6作為Mn4+的來源，透過高效陽離子交換法成功合成Rb2TiF6:Mn4+、Cs2ZrF6:Mn4+、Li2SiF6:Mn4+及Li2TiF6:Mn4+ 等四種高飽和紅光氟化物螢光體。上述氟化物主體晶格中，Mn4+ 所取代者為八面體配位的Ti4+、Si4+ 或Zr4+ 格位，我們利用X光粉末繞射、螢光、漫反射與熱消光光譜及掃描式電子顯微鏡進行螢光體之晶體結構、光學與發光特性及色度學特性分析鑑定，同時進行WLED封裝探討其應用潛力，研究結果顯示Rb2TiF6:Mn4+ 具有極高量子效率及熱消光性，極具應用於暖白光LED之潛力，其在波長 630 nm的窄波形紅光可用以改善白光LED色溫過高及演色性不足之缺失。

關鍵字

氟化物 ； 螢光粉 ； 四價錳 ； 發光二極體

並列摘要

Being able to circumvent the problems of high color temperature (CCT > 4000K) and low color rendering index (CRI < 80) of conventional YAG-type white light-emitting diodes (WLEDs) used for lighting, Mn4+-activated red-emitting fluorides have been emerging as potential red phosphors for warm WLEDs due to their unique optical properties.
In this research, we have successfully synthesized four novel fluoride phosphors, Rb2TiF6:Mn4+, Cs2ZrF6:Mn4+ and Li2XF6:Mn4+ (X= Ti and Si), through cation-exchange method using K2MnF6 as the Mn4+ source. The crystal structures and luminescent properties of the above phosphors were well investigated using X-ray powder diffraction (XRD), photoluminescence excitation and emission spectra (PL/PLE), temperature-dependent PL spectra, and decay measurements.
Mn4+- activated red-emitting fluoride phosphors can be excited over a broad range from UV to blue region (300-550nm), attributed to the 4A2g → 4T2g and 4A2g → 4T1g transitions of Mn4+, and present highly-saturated red emission peak at around 630 nm, corresponding to the 2Eg → 4A2 transition of Mn4+.
In addition, under excitation at 450 nm Rb2TiF6:Mn4+ exhibits decent thermal-quenching stability and high quantum efficiency (65.7%) relative to that of commercial K2SiF6:Mn4+. Furthermore, we also fabricated a WLED lamp using Rb2TiF6:Mn4+ as the red-emitting phosphor, Y3Al5O12:Ce3+ (YAG) and a 450 nm InGaN-based blue LED chip driven by 100 mA current. Our research results show that Rb2TiF6:Mn4+ can be one of the most promising red phosphor for warm-white LED.

並列關鍵字

fluoride ； phosphor ； Mn(IV) ； LED

參考文獻

M. H. Chang, D. Das, P.V. Varde, M. Pecht, “Light emitting diodes reliability review”, Microelectron. Reliab., 52, 762–782, 2012.

I. Ahemen, K. DeDilip and A. N. Amah, “A review of solid state white light emitting diode and its potential for replacing conventional lighting technologies in developing countries”, Appl. Phys. Res., 6,95–108, 2014.

C. C. Lin and R. S. Liu, “Advances in phosphors for light-emitting diodes”, J. Phys. Chem. Lett., 2, 1268–1277, 2011.

P. Schlotter, R. Schmidt and J. Schneider, “Luminescence conversion of blue light emitting diodes”, Appl. Phys. A, 64, 417–418, 1997.

P. Pust, V. Weiler, C. Hecht, A.Tücks, A. S. Wochnik, A. K. Hen, D. Wiechert, C. Scheu, P. J. Schmidt and W. Schnick, “Narrow-band red-emitting Sr[LiAl3N4]:Eu2+ as a next-generation LED-phosphor material”, Nat. Mater., 13, 891–896, 2014.