希望透過Civil 3D對道路工程規劃構想進行3D廊道模型之模擬,使業主更了解該構想,得減少變更設計致工程延遲所造成的損失。 本論文研究區域為朝陽科技大學學生宿舍至行政大樓前之紅磚廣場,利用電子經緯儀進行現地數位測量,以Civil 3D完成現地地形測量地形圖,再使用Civil 3D之功能繪製出平面圖、標準橫斷面圖及縱斷面規劃圖;接著再以Civil 3D之3D塑型及多重視圖圖塊繪製3D建物至Civil 3D道路廊道上,最後利用Civil 3D之物件檢視器與Autodesk Design Review功能,呈現3D道路廊道模型。 結果如下:(1)已利用Civil 3D建立初步之3D道路廊道。(2)在平面地形圖中,利用電子經緯儀進行數位測量,可逕與Civil 3D連結。(3)使用Civil多重視圖圖塊中的建築物比較接近現況。(4)使用Autodesk Design Review呈現的3D立體圖比較完整。(5) Civil 3D程式局部修正的功能,快速修改變更物件,能自動更改的功能,可以在規劃上節省相當多的時間。
This study used Civil 3D simulate 3D corridor model of road engineering planning to let proprietor better understand the planning idea, and effectively reduce the mistake of planning and budget modification. In this study, the planning area is Chaoyang University of Technology, which ranged from the student dormitory to the front brick square of the administration center. This study used the electronic theodolite survey to finish topographic diagram, standard cross-section diagram, and profile diagram. In addition, this study also used the 3D Models and Civil Building Blocks to draw 3D road corridor. Lastly, the Civil 3D Object Viewer and the Autodesk Design Review were used to show the 3D road corridor model. The results are as followed:(1) Have used the Civil 3D for the establishment of preliminary 3D road corridor. (2) In topographic diagram, by using electronic theodolite survey, it can easily connect to the Civil 3D software. (3) Use Civil Building Blocks to compare the similarity with the site situation. (4) Use Autodesk Design Review render 3D to show the perspective view more completely. (5) The correction function of Civil 3D software can save a lot of times in planning process with its fact correcting and automatic changing function.