本論文主要探討液晶顯示器模組作動原理及設計方法,文中並詳細介紹各模組元件。本文從最基礎的模組構成概念的介紹到各元件之種類與應用方法均加以詳細說明,最後利用實際案例的開發過程,以讓新人了解實際的設計步驟。 本論文首先深入探討液晶顯示器模組之設計開發流程及各主要元件的設計準則,然後,以實際的客製化案例說明各設計步驟,並於多變的設計需求中,藉由實際案例所累積的經驗法則,提供足夠的解決方案。 經由本文的探討發現液晶顯示器顯示效果的確保與背光源對液晶顯示器的正確定位是兩個最主要的設計重點,文中所提供的設計方法與準則,可使液晶顯示器模組的新進設計師在進入此設計領域後,對於自己的設計工作能擁有一個清晰良好的設計概念,使能盡快投入設計的行列。
Probe into the mould group of the liquid crystal display and make and move the principle and design method mainly in this thesis, introduce the component of every mould group in the article and in detail . This text forms the introduction to the concept from the most basic mould group to the kind of every component and uses the elaboration of the method , utilize development course of the real case finally, put forward a set of effective design steps. Probe into the design criteria of developing the procedure and every component of design of the mould group of the liquid crystal display deeply at first in this thesis, then, it proves that each designs the step to make the case of melting with the real guest, and in the changeable design demand, make use of the experience rule accumulated by real case, offer enough solution. Find via the discussion of this text that the liquid crystal display shows that it is two main design focal points to really protect with the confirming the location to liquid crystal display of backlight source in result, design method and criterion offered, can make liquid crystal display mould group new to enter designer in enter this design field in the article, there can be a clear and good design concept to one's own design work, can put to make into the ranks designed.