- 期刊
An Alternative Method for Fabrication of An Open Hollow obturator-case Report
並列摘要
To minimize the weight of the obturator, a variety of methods have been presented for hollow obturator fabrication. This article describes an alternative method for fabricating an open hollow obturator that involves digging a hole through the base of the cast. This type of obturator was provided to a patient with a partial resection of the left maxilla extending from the midline to the anterior border of the left tuberosity due to an adenocarcinoma of the left maxillary sinus. This alternative technique resulted in a lightweight, 1-piece prosthesis without the disadvantages of leakage or discoloration encountered with traditional closed hollow obturators and with the advantage of allowing control of the thickness of the hollow portion.
延伸閱讀
- Lin, F. J., Tu, C. P., Shiau, A. C., & Wu, H. T. (1999). Calibration of High Dose Rate Source Activity. 中華放射線醫學雜誌, 24(2), 57-60. https://www.airitilibrary.com/Article/Detail?DocID=10188940-199904-24-2-57-60-a
- 林明鋒（2007）。Fabrication and analysis of MEMS resonator〔碩士論文，國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU.2007.01661
- 林建良、黃清浩（1999）。Reduction of Orbital Blow-out Fracture - Report of Three Cases。中華民國耳鼻喉科醫學雜誌，34(3)，257-261。https://doi.org/10.6286/1999.34.3.257
- Lau, M. K. (2001). A Custom-made Remote Injection Device for Hysterosalpingography and Other Disorders. 中華放射線醫學雜誌, 26(1), 23-25. https://www.airitilibrary.com/Article/Detail?DocID=10188940-200102-26-1-23-25-a
- 何宗翰（2011）。Study on the fabrication and optice properties of holographic beam splitter device〔碩士論文，國立臺灣師範大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0021-1610201315263333