透過您的圖書館登入
IP:34.203.221.104
  • 學位論文

人體尺寸統計估計模式之建立與驗證–以台灣居民為例

Development and validation of a statistic model for estimating body dimensions–Taiwanese civilians as an example

指導教授 : 王明揚

摘要


Anthropometric data is the foundation of ergonomic design for all products and environments. However, the procedures for collecting anthropometric data are tedious, complicated and costly in terms of labor, time and financial resources. It will be much cheaper if the old anthropometric data can be updated easily without lengthy measurement processes. However, most practitioners do not know how the old anthropometric data can be converted into applicable new data when updated data is unavailable. Therefore, it is important to develop methods that can easily update old data into new data with minimal error. A last, complete and large-scale anthropometric database was built in Taiwan in the late 1990s and published in 2002. In order to maximize the value of the Taiwanese anthropometric database, the statistical/mathematical estimating model developed in this study was used to analyze the available pairwise body dimension ratios (PBD ratios) and to find the constant body ratio benchmarks (CBR benchmarks) that are least affected by gender and age. This resulted in the identification of 483 unique CBR benchmarks, which were verified by calculating and processing 35,245 PBD ratios; meanwhile, quasi-CBR benchmarks that are least affected by either gender or age were also identified. Additionally, 197 estimation formulae with limited easily-measured 19 body dimensions were built using 483 CBR benchmarks. Further, this study recruited 30 participants as samplings and determined that this estimating model is more accuracy and cost-effective. To evaluate the practicability of this estimating model on separate body dimensions, the 12 finger cun-derived benchmarks (F-cun-derived benchmarks) were constructed by using this estimating model procedure and further validated by an experimental measurement. Accordingly, the statistical/mathematical estimating model, CBR benchmarks, 197 estimation formulae, and 12 F-cun-derived benchmarks make it possible to update anthropometric data quickly, accurately, and at low cost.

參考文獻


6. Bridger, R. S., 1995. Introduction to ergonomics. International Ed. New York: McGraw-Hill, Inc.
77. Wang, M. J., Wang, E. M., Lin, Y. C., 2002a. Anthropometric data book of Chinese people in Taiwan (in Chinese). Republic of China: Ergonomics Society of Taiwan.
9. Chiu, W. C., 1984. The Research on the Standard of Young Women's Dress and Difference of External Physical Appearance. (in Chinese, Project # NSC73-0415-E020-01) (Available from National Science Council, Taipei, Taiwan, ROC)
1. Aird, M., Coyle, M., Cobbin, D. M., Zaslawski, C., 2000. “A Study of the Comparative Accuracy of Two Methods of Locating Acupuncture Points,” Acupuncture in Medicine 18 (1), 15-21.
2. Black, K., 1997. Business statistics: contemporary decision making. 2nd Ed. New York: West Publishing Company.

被引用紀錄


謝棟杰(2008)。微波式RFID於電子廠無塵室FFU監控系統之應用〔碩士論文,國立清華大學〕。華藝線上圖書館。https://doi.org/10.6843%2fNTHU.2008.00159
陳怡愷(2015)。整合穴位參數建構智能型雷射針灸儀〔碩士論文,中原大學〕。華藝線上圖書館。https://doi.org/10.6840%2fcycu201500077
楊雅琪(2007)。改善營業稅電子申報作業流程效益之研究〔碩士論文,中原大學〕。華藝線上圖書館。https://doi.org/10.6840%2fcycu200700289
葉昱慶(2013)。以深度圖影像與骨架特徵點進行人體重量估測〔碩士論文,中原大學〕。華藝線上圖書館。https://doi.org/10.6840%2fCYCU.2013.00362

延伸閱讀