Title

模糊品質評級方法建立之研究

Translated Titles

The Study on the Establishment of Fuzzy Quality Evaluation Method

DOI

10.6459/JCM.201303_10(1).0006

Authors

葉俊賢(J. H. Yeh);楊龍隆(L. L. Yang)

Key Words

統計製程管制 ; 模糊建模 ; 品質評級 ; Statistical Process Control ; Fuzzy Modeling ; Quality Evaluation

PublicationName

危機管理學刊

Volume or Term/Year and Month of Publication

10卷1期(2013 / 03 / 01)

Page #

53 - 62

Content Language

繁體中文

Chinese Abstract

時至今日,科技的發展變化非常快速,使得科技產品的製程手法也日新月異,在於高標準的品質要求下,如何降低成本及提高產品品質是相當重要的課題,尤其在激烈的商業競爭環境下,如何有效使用統計製程管制工具進行監控整個製程狀態,以及在穩定的製程當中提供更精確的品質評級方法,都是產業界必須面對的課題。 本研究的目的在於探討使用模糊數建模方法所建立的新評級規則,應用於太陽能多晶矽晶錠長成品質的判讀程度與效益,研究結果顯示,透過模糊規則庫的建立,可大幅降低傳統管制圖當中造成誤差且低敏感度的缺點,避免在品質管制過程造成誤判,造成無謂的成本損失,此結果除了可以提供品管人員作為擬定改善策略的參考外,亦有助於業界提升生產線管控品質的能力。

English Abstract

Up to date, the change of science development and technology changes are very fast that causes the manufacturing process of high-tech product changes with each passing day more and more. According to the high standard requirements of product quality, how to increase product quality and reduce cost becomes an important task. Particularly, in the intense commercial competition surrounding, how to effectively use statistical process control tools to monitor the entire process, as well as in the stability manufacturing process provides more precise quality rating methodology, are topics that industry must face. The purpose of this study is to construct the new evaluation rules via the fuzzy number modeling and apply to analysis the interpretation of the extent and effectiveness of polysilicon ingot quality. Results of this study show that the new evaluation rules are able to greatly reduce the error judgment and the low sensitivity phenomena and to avoid the unnecessary cost loss in the quality control process that belongs to the shortcomings of the traditional control charts. These results not only can provide quality control personnel prepared to improve the strategy reference but also can assist the industry to upgrade quality control ability to control the quality under requirement.

Topic Category 社會科學 > 管理學
Reference
  1. Cheng, C. B.(2005).Fuzzy process control: construction of control charts with fuzzy number.Fuzzy Sets and Systems,154,287-303.
  2. Dubois, D.,Prade, H.(1978).Operations on fuzzy numbers.International Journal of System Science,9,613-626.
  3. Zadeh, L. A.(1965).Fuzzy Sets.Information and control,8,338-353.
  4. 陳秉泰(2005)。碩士論文(碩士論文)。國立雲林科技大學工業工程與管理研究所。