Reference


[3] R. B. Bird, W. E. Stewart, and E. N. Lightfoot, "Transport Phenomena," Wiley, New York, 1976.
連結：

[4] A. Parvareh, M. Rahimi, M. Yarmohammadi, and A. A. Alsairafi, "Experimental and CFD study on the effect of jet position on reactant dispersion performance," International Communication in Heat and Mass Transfer, vol. 36, pp. 10961102, 2009.
連結：

[5] P. Naphon, S. Klangchart, and S. Wongwises, "Numerical investigation on the heat transfer and flow in the minifin heat sink for CPU," International Communication in Heat and Mass Transfer, vol. 36, pp. 834840, 2009.
連結：

[6] P. Naphon, "Effect of wavy plate geometry configurations on the temperature and flow distributions," International Communication in Heat and Mass Transfer, vol. 36, pp. 942946, 2009.
連結：

[7] M. M. Miller, G. A. Prinz, S. F. Cheng, and S. Bounnak, "Detection of a micronsized magnetic sphere using a ringshaped anisotropic magnetoresistancebased sensor: a model for a magnetoresistancebased biosensor," Applied Physics Letters vol. 81, pp. 22112213, 2002.
連結：

[8] M. Nakamura, K. Decker, J. Chosy, K. Comella, K. Melnik, L. Moore, L. C. Lasky, M. Zborowski, and J. J. Chalmers, "Separation of a breast cancer cell line from human blood using a quadrupole magnetic flow Sorter," Biotechnology Progress, vol. 17, pp. 11451155, 2001.
連結：

[10] W. T. Cheng and H. W. Cheng, "Synthesis and characterization of cobalt nanoparticles through microwave polyol process," AIChE Journal, vol. 55, pp. 13831389, 2009.
連結：

[12] S. Sun, C. B. .Murray, D. Weller, L. Folks, and A. Moser, "Monodisperse FePt nanoparticles and ferromagnetic FePt nanocrystal superlattices," Science, vol. 287, pp. 19891992, 2000.
連結：

[13] C. Y. Hong, I. J. Jang, and H. E. Horng, "Ordered structures in Fe3O4 kerosenebased ferrofluid," Journal of Applied Physics, vol. 81, pp. 42754277, 1997.
連結：

[14] E.L.Macker, "A theoretical approach of the colloidalchemical stability of dispersions in hydrocarbons," Journal of Colloid Science, vol. 6, pp. 492495, 1952.
連結：

[15] A.Guardo, M.Coussirat, F.Recasens, M.A.Larrayoz, and X.Escaler, "CFD study on particletofluid heat transfer in fixed bed reactors: Convective heat transfer at low and high pressure," Chemical Engineering Science, vol. 61, pp. 43414353, 2006.
連結：

[16] J. Koo and C. Kleinstreuer, "Laminar nanofluid flow in microheatsink," International Journal of Heat and Mass Transfer, vol. 48, pp. 26522661, 2005.
連結：

[21] W. T. Cheng, H. C. Li, and C. N. Huang, "Simulation and optimization of silicon thermal CVD through CFD integrating Taguchi method," Chemical Engineering Journal, vol. 137, pp. 603613, 2008.
連結：

[22] C. H. Lin, W. T. Cheng, and J. H. Lee, "Effect of embedding a porous medium on the deposition rate in a vertical rotating MOCVD reactor based on CFD modeling," International Communication in Heat and Mass Transfer, vol. 36, pp. 680685, 2009.
連結：

[23] C. H. Lin, S. H. Hsu, C. N. Huang, W. T. Cheng, and J. M. Su, "A scaffoldbioreactor system for a tissueengineered trachea," Biomaterials, vol. 30, pp. 41174126, 2009.
連結：

[24] 黃啟恩,"高爐爐下部流力與熱數值模擬," 國立中興大學化學工程研究所博士論文, 2008.
連結：

[25] K. H. Peters, H. W. Gudenau, and G. Still, "Hot metal flow in a blast furnace hearth  model tests," Steel Research, vol. 56, pp. 547552, 1985.
連結：

[27] K. Shibata, "Control of hot metal flow in blast furnace hearth," R&D Kobe Steel Engineering Report, vol. 4, 1991.
連結：

[28] K. Shibata, Y. Kimura, M. Shimizu, and S.i. Inaba, "Dynamics of deadman coke and hot metal flow in a blast furnace hearth," ISIJ International, vol. 30, pp. 208215, 1990.
連結：

[29] W. Kowalski, "State of the art for prolonging blast furnace campaigns," REVUE DE MetallurgieCahiers D Informations Techniques, pp. 493505, 2000.
連結：

[31] C. N. Huang, S. W. Du, and W. T. Cheng, "Numerical investigation on hot metal flow in blast furnace hearth through CFD," ISIJ Internaional, vol. 48, pp. 11821187, 2008.
連結：

[33] A. Preuer, J. Winter, and H. Hiebler, "Computation of the iron flow in the hearth of a blast furnace," Steel Research, vol. 63, pp. 139146, 1992.
連結：

[34] A. Preuer, J. Winter, and H. Hiebler, "Computation of the erosion in the hearth of a blast furnace," Steel Research, vol. 63, pp. 147151, 1992.
連結：

[36] F. Yoshikawa and J. Szekely, "Mechanism of Blast Furnance Hearth Eroson," Ironmaking and Steelmaking, pp. 159168, 1981.
連結：

[43] A. Kasai, T. Murayama, and Y. Ono, "Measurement of effective thermal conductivity of coke," ISIJ International, vol. 33, pp. 697702, 1993.
連結：

[44] V. Panjkovic, J. S. Truelove, and P. Zulli, "Numerical modelling of iron flow and heat transfer in blast furnace hearth," Ironmaking and Steelmaking, vol. 29, pp. 390400, 2002.
連結：

[45] C. Q. Zhou, F. Yan, K. A. Patnala, and D. Roldan, "Numerical investigation of parametric effects on a blast furnace hearth," presented at AISTech 2004 Proceedings, 2004.
連結：

[47] S. K. Dash, D. N. Jha, S. K. Ajmani, and A. Upadhyaya, "Optimisation of taphole angle to minimise flow induced wall shear stress on the hearth," Ironmaking and Steelmaking, vol. 31, pp. 207215, 2004.
連結：

[48] S. K. Dash, S. K. Ajmani, A. Kumar, and H. S. Sandhu, "Optimum taphole length and flow induced stresses," Ironmaking and Steelmaking, vol. 28, pp. 110116, 2001.
連結：

[49] S. K. Dash, S. K. Ajmani, A. Kumar, and H. S. Sandhu, "Optimisation of tap hole length of "D" blast furnace using mathematical modelling," Tata Search pp. 144150, 2001.
連結：

[50] A. K. Vats and S. K. Dash, "Flow induced stress distribution on wall of blast furnace hearth," Ironmaking and Steelmaking, vol. 27, pp. 123128, 2000.
連結：

[51] B. Desai, R. V. Ramna, and S. K. Dash, "Optimium cokefree space volume in blast furnace hearth by wall shear stress analysis," ISIJ International, vol. 46, pp. 13961402, 2006.
連結：

[52] A. V. Luikov, "Conjugate convective heat transfer problems," International Journal of Heat and Mass Transfer, vol. 17, pp. 257265, 1974.
連結：

[53] A. V. Luikov, V. A. Aleksashenko, and A. A. Aleksashenko, "Analytical methods of solution of conjugated problem in convective heat transfer," International Journal of Heat and Mass Transfer, vol. 14, pp. 10471056, 1971.
連結：

[55] V. Panjkovic and J. S. Truelove, "Computational fluid dynamics modelling of iron flow and heat transfer in the iron blast furnace hearth," Second International Conference on CFD in the Minerals and Process Industries, CSIRO, Melbourne, Australia, pp.399404, 1999.
連結：

[56] W. T. Cheng, C. N. Huang, and S. W. Du, "Three dimensional iron flow and heat transfer in the hearth of a blast furnace during tapping process " Chemical Engineering Science, vol. 60, pp. 44854492, 2005.
連結：

[57] C. M. Chang, W. T. Cheng, C. E. Huang, and S. W. Du, "Numerical prediction on the erosion in the hearth of a blast furnace during tapping process," International Communication in Heat and Mass Transfer, vol. 36, pp. 480490, 2009.
連結：

[60] 林忠豪, "高爐爐下部鐵水流動中鈦化合物濃度分佈之數值模擬," 國立中興大學化學工程研究所博士論文, 2009.
連結：

[61] R. Rezende, "DISSERTACAO DE MESTRADO EM ENGENHRARIA MECHCANICA," UNIVERSIDADE FEDERAL DE SANTA CATARINA PROGRAMA DE POSGRADUACAO EM ENGENHARIA MECANICA, 2008.
連結：

[63] Z. F. Yuan, W. L. Huang, and K. Mukai, "Local corrosion of magnesiachrome refractories driven by marangoni convection at the slagmetal interface," Journal of Colloid and Interface Science, vol. 253, pp. 211216, 2002.
連結：

[65] B. J. Keene, "Review of data for the surface tension of iron and its binary alloys," International Material. Review, vol. 33, pp. 135, 1988.
連結：

[66] K. Mukai, T. Masuda, K. Gouda, T. Harada, J. Yoshitomi, and S. Fujimoto, "Local corrosion of blast furnace trough material at the slagmetal interface," The Japan Institute of Metals, vol. 48, pp. 6976, 1984.
連結：

[68] Z. Li, K. Mukai, and Z. Tao, "Reactions between MgOC refractory, molten slag and metal," ISIJ International, vol. 40, pp. S101S105, 2000.
連結：

[69] K. Mukai, "Marangoni flows and corrosion of refractory walls," Physical and Engineering Sciences, vol. 356, pp. 10151026, 1998.
連結：

[70] Q. He, P. Zulli, F. Tanzil, B. Lee, J. Dunning, and G. Evans, "Flow characteristics of a blast furnace taphole stream and its effects on trough refractory wear," ISIJ International, vol. 42, pp. 235242, 2002.
連結：

[71] Q. He, G. Evans, P. Zulli, F. Tanzil, and B. Lee, "Flow characteristics in a blast furnace trough," ISIJ International, vol. 42, pp. 844851, 2002.
連結：

[73] V. Stanek and J. Szekely, "The effect of surface driven flows on the dissolution of a partially immersed solid in a liquidanalysis," Chemical Engineering Science, vol. 25, pp. 699715, 1970.
連結：

[74] P. Hrma, "Dissolution of a solid body governed by surface free convection," Chemical Engineering Science, vol. 25, pp. 16791688, 1970.
連結：

[75] Gambit Modeling Guide, 2003.
連結：

[76] B. E. Launder and D. B. Spalding, "Lectures in Mathematical Models of Turbulence," Academic Press, London, England, 1972.
連結：

[77] S. Ergun, "Fluid flow through packed columns," Chemical Engineering Progress, vol. 48, pp. 8994, 1952.
連結：

[78] V. R. Voller and C. R. Swaminathan, "Generalized sourcebased method for solidification phase change," Numerical Heat Transfer B, vol. 19(2), pp. 175189, 1991.
連結：

[79] V. R. Voller and C. Prakash, "A fixedgrid numerical modeling methodology for convectiondiffusion mushy region phasechange problems," International Journal of Heat and Mass Transfer, vol. 30, pp. 17091720, 1987.
連結：

[82] J. U. Brackbill, D. B. Kothe, and C. Zemach, "A continuum method for modeling surface tension," Journal of Computation Physics, vol. 100, pp. 335354, 1992.
連結：

[85] S. V. PatanK and D. B. Spalding, "A calculation procedure for heat, mass and momentum transfer in threedimensional parabolic flows," International Journal of Heat and Mass Transfer, vol. 15, pp. 17871806, 1972.
連結：

[86] J. P. V. Doormal and G. G. Raithby, "Enhancement of SIMPLE method for predicting incompressible fluid flows," Numerical Heat Transfer, vol. 7, pp. 147163, 1984.
連結：

[87] R. I. Issa, "Solution of the implicitly discretised fluid flow equations by operatorsplitting," Journal of Computation Physics, vol. 62, pp. 4065, 1986.
連結：

[88] S. Armsfield and R. Street, "The fractionalstep method for the NavierStokes equations on staggered grids: Accuracy of three variations," Journal of Computational Physics, vol. 153, pp. 660665, 1999.
連結：

[89] H. M. Glaz, J. B. Bell, and P. Colella, "Secondorder projection method for the incompressible NavierStokes equations," Journal of Computational Physics, vol. 85, pp. 257, 1989.
連結：

[90] 葉晉佑, "鐵水流動中爐蕊漂浮高度影響高爐爐床底部侵蝕之數值模擬," 國立中興大學化學工程研究所碩士論文, 2009.
連結：

[1] R. Bird, R. Armstrong, and O. Hassager, "Dynamic of Polymeric Liquids, " John Wiley & Sons, New York, 1977.

[2] 方富民, "流體力學," 中國圖書公司出版, 1996.

[9] B.Berkovsky, "Magnetic Fluids and Application Handbook," Begell House, 1996.

[11] 鄭惠文,"奈米鈷磁性流體製備研究," 國立中興大學化學工程研究所碩士論文,2005.

[17] J.Maxwell, "A Treatise on Electricity and Magneticism," Oxford University Press, Cambridge, UK, 1904.

[18] Fluent 6.2 User's Guide, Lebanon, 2005.

[19] Fluent 6.2 UDF Manual, Lebanon, 2005.

[20] C. M. Chang, W. T. Cheng, W. J. Liu, H. W. Cheng, C. N. Huang, and S. W. Du, "Thermal flow of fluid with magnetic particles in the presence of magnetic field," International Communication in Heat and Mass Transfer, vol. 37, pp. 801808, 2010.

[26] 楊宗翰, "粉煤在高爐風徑區內之熱解特性," 輔英科技大學環境工程與科學系碩士論文, 2005.

[30] O. Havelange, G. Danloy, and C. Franssen, "The deadman, floating or not," the 2002 ATS International Steelmaking Conference, Paris, pp. 195201, 2002.

[32] R. Nicolle, J. M. Steiler, M. Helleisen, M. J. Venturini, M. Jusseau, M. V. Crayelinghe, B. Metz, and P. Duperray, "The internal state of the blast furnace hearth," The Sixth International Iron and Steel Congress, Nagoya, pp. 430438, 1990.

[35] http://www.thepotteries.org/shelton/blast_furnace.

[37] http://www.keytosteel.com/Articles/Art159.htm.

[38] S. N. Silver, F. Vernilli, S. M. Justus, O. R. Marques, A. Mazine, J. B. Baldo, E. Longo, and J. A. Varela, "Wear Mechanism for Blast Furnace Hearth Refractory Lining," Ironmaking and Steelmaking, vol. 32, pp. 459467, 2005.

[39] J. R. Post, T. Peeters, Y. Yang, and M. A. Reuter, "Hot Metal Flow in the Blast Furnace Hearth : Thermal and Carbon Dissolution Effects on Buoyancy Flow and Refractory Wear," Third International Conference on CFD in the Minerals and Process Industries, CSIRO, Melbourne, Australia, pp.434440, 2003.

[40] R. McNally, F. Roulet, D. Kuster, J. Schoennahl, and D. Lucke, "Advance & advantages with ceramic cup technology," ALAFAR, Mexico, pp.1618, 2000.

[41] M. Kosaka and S. Minowa, "On the rate of dissolution of carbon into molten FeC alloy," in transactions ISIJ, vol. 8, 1968, pp. 392400.

[42] R. G. Olsson, V. Koump, and T. F. Perzak, "Rate of dissolution of carbon in molten FeC alloys," Transactions of the metallurgical society of aime, vol. 236, pp. 426429, 1966.

[46] F. Yan and C. Q. Zhou, "3D computational modeling of a blast furnace hearth," AISTech 2004 Proceedings, pp.249260, 2004.

[54] B. Wright, P. Zulli, F. Bierbrauer, and V. Panjkovic, "Assessment of refractory condition in a blast furnace hearth using computational fluid dynamics," Third International Conference on CFD in the Minerals and Process Industries, CSIRO,Melbourne,Australia, pp. 645650, 2003 .

[58] 李東生, 朱建偉, 王文忠, 趙慶傑, and 余武明, "鞍鋼1號高爐風口喂線定向修復爐缸試驗,"燒鐵25, pp. 4849, 2006.

[59] 王文忠, 趙慶傑, and 徐金鋒, "高爐風口喂線護爐技術開發與應用," 四川冶金, vol. 27, pp. 4043, 2005.

[62] D. Schwabe, "Marangoni effects in crystal growth melts," Physic Chemical Hydrodynamics, vol. 2, pp. 263280, 1981.

[64] E. Ricci, L. Nanni, and A. Passerone, "Oxygen transport and dynamic surface tension of liquid metals, Philosophical Transactions of the Royal Society A: Mathematical," Physical and Engineering Sciences, vol. 356, pp. 981993, 1998.

[67] K. Husig, M. Ackermann, M. Beseoglu, and H. K. Duisburg, "Theoretical considerations on the layout of blast furnace troughs and results of their industrial application," Stahl und Eisen, vol. 98, pp. 11271133, 1978.

[72] L. M. Juhani, P. T. Tuomas, K. Johanna, F. T. Matti, N. Hannu, and H. J. Juhani, "Modelling of fluid flows in the blast furnace trough," Steel Research, vol. 72, pp. 130135, 2001.

[80] V. R. Voller, A. D. Brent, and K. J. Reid, "A computational modeling mramework for the analysis of metallurgical solidification process and phenomena," Conference for Solidification Processing, Ranmoor House, Sheffield, September, 1987.

[81] V. R. Voller, "Modeling Solidification Processes," Mathematical Modeling of Metals Processing Operations Conference, American Metallurgical Society, Palm Desert, CA, 1987, 1987.

[83] 李人獻, "有限體積法基礎," 國防工業出版社, 北京, 2008.

[84] 王福軍, "計算流體動力學分析CFD軟體原理與應用," 清華大學出版社, 北京, 2004.
