透過您的圖書館登入
IP:3.17.128.129
  • 學位論文

RFID技術應用於RC建築構件之研究

The Study of Applying RFID Technology on The Reinforced Concrete Construction Component

指導教授 : 王隆昌

摘要


無線射頻辨識(Radio Frequency Identification ,RFID)技術最早應用於第二次世界大戰中,用於分辨敵我戰機,其後Wal-mart則廣泛應用於物流之管理,並且已獲得良好之效益;有鑑於此各國近年紛紛將RFID技術應用於營建產業,包含營建材料、工地安全管理、預鑄構件吊裝、開放式建築等,並且獲得良好的成效,故此RFID技術為目前營建產業發展重點之一。 依據營建署2008年1月統計,國內建築物以RC構造為最多,其建築面積約佔全國70%以上,故此RC構造為國內目前最重要之建築形式。近年已有相關研究將RFID技術應用於預鑄構件之追蹤、品管檢驗、儲運管理等,最後提供一行動化管理系統,促使執行人員能確實核對構件之圖說與快速擷取相關訊息與構件之循環再利用。然相關研究多將電子標籤附掛於構件上,較少將電子標籤置入於構件內,並且又依據RFID之特性易受水與金屬之影響,而造成讀取之困難。 故本研究擬將RFID電子標籤置入於RC建築構件(梁、柱、版、牆)中,以不同電子標籤頻率(低頻、高頻、超高頻)系統與種類測試植入RC建築構件之通信狀況及探討施作之可行性,並研擬電子標籤置入於RC建築構件之適切方式、位置與建議植入流程。經實驗分析,電子標籤不論何種頻段置入後皆可讀取,並 且置入之方式以附掛於模板內其效果較佳;透過研究之成果期能強化RFID技術應用於RC構件之相關技術與知識,達到建築整體生命週期資料保存與後續維護管理之E化管理效益,並提供後續RFID技術於RC構件整合應用之 相關研究參考。

關鍵字

RFID RC建築構件 電子標籤

並列摘要


Radio frequency identification (RFID) was first put in use during the war world II as a technology to identify enemy or ally fighter airplanes. After that Wal-mart made an application of RFID in its logistic management. Today, RFID is widely applied in different fields including the construction material identification, site safety management, hoist precast member of construction industry. The study applied different frequencies of RFID tag from low, high to ultrahigh frequency. The tag was placed into beam, column, plate and wall of RC structure components to test RFID signal communication status and its feasibility. This study proposed suitable method, position and procedure to implant RFID tag and was put to experiment. Results shown that different frequency RFID tag does not influence the result from reading, but the method and position of implant does. The achievements from the study intensify technology and knowledge for applying RFID on RC components. The study also helps with the information preservation and maintenance management for the complete life-cycle of constructions to provide follow-up RFID technology on RC component of the integrated application related study.

參考文獻


【27】蕭榮興,RFID技術運作的神經中樞-RFID Middleware,電子
工業安全衛生月刊,2007。
【18】洪文政,RFID於飯店管理應用,碩士論文,國立成功大學,
【24】張鈞皓,建構RFID醫療供應鏈履歷以管制藥品為例,碩士論
【28】廖軒邑,RFID應用於RC構件施工性之研究,碩士論文,國立

被引用紀錄


葉日漢(2010)。應用無線射頻辨識技術建構營建工地人員門禁安全管理系統之研究〔碩士論文,國立交通大學〕。華藝線上圖書館。https://doi.org/10.6842/NCTU.2010.00540
羅南海(2011)。RFID技術於營建工地人員控管實務應用之研究〔碩士論文,國立臺北科技大學〕。華藝線上圖書館。https://doi.org/10.6841/NTUT.2011.00275
林恒旻(2014)。瀝青混凝土鋪面材料對RFID探測下地人手孔之影響〔碩士論文,國立屏東科技大學〕。華藝線上圖書館。https://doi.org/10.6346/NPUST.2014.00300
張智凱(2009)。建築物生產履歷資訊系統建置之探討〔碩士論文,國立臺北科技大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0006-2408200901081400
劉宏達(2010)。整合RFID技術於工地安全控管資訊系統建置之研究-隧道工程為例〔碩士論文,國立臺北科技大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0006-1908201021555200

延伸閱讀