本研究係對剖布機之布面緯線變形所產生之曲線利用X,Y座標對其加以統計分析,討論其機構中各桿件相對位置對布匹行經路徑之影響並探討其U型桿之設計依據,進而分析各桿件於布匹行徑時之最佳位置,以利設計者定義各桿件於設計時之最佳起始位置。 本研究的目的在於了解剖布機作動時其將布面展開之U型桿的設計理論,並從研究中分析各桿件相對位置對布匹行走路徑的影響,從而推導出其最佳之相對位置,以供廠商或設計者在調整或設計時一參考數據並建議改善方向。實驗方法是將變形之曲線視為一多項式函數曲線並在此曲線中之最低點(行走路徑最短者)取一水平線當基準線,量測X,Y值,透過電腦軟體做曲線擬合求方程式,再對相關桿件做微調,收集數據並與原始函數做比較,分析其影響,進而修正其變形量以找出變形量最少之最佳相對位置。
This study describes fabric parallel deformation on the open-rolling-spinning machine and investigates the deformation curves by using statistical data and mathematics software. The experimental results show that the relative position of linkage and path are the main parameters of fabric cloth deformation. With adjustment of the U-shaped rod position and path, it is clear that there exists a relationship between the relative linkage parts position and path. Moreover, we used mathematics software to analyze the best position of linkage parts for improving the deformation.